Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject KINETICS
Showing results 1 to 40 of 40
| A microstructure evolution model for numerical prediction of austenite grain size distribution Jung, KH; Lee, HW; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.9, pp.1136 - 1144, 2010-09 |
| A variation in wrinkle structures of UV-cured films with chemical structures of prepolymers Park, Seung Koo; Kwark, Young-Je; Nam, Saekwang; Moon, Jaehyun; Kim, Dong Wook; Park, Suntak; Park, Bongje; et al, MATERIALS LETTERS, v.199, pp.105 - 109, 2017-07 |
| Accurate and Efficient Prediction of Highly Disordered Bi2O3 with Optimum Structure Pool: Combined Approach of the Special Quasirandom Structure Method and Structure Sampling Jeong, Incheol; Yeon, Changho; Lee, Chan-Woo; Lee, Kang Taek, JOURNAL OF PHYSICAL CHEMISTRY C, v.126, no.44, pp.18885 - 18892, 2022-11 |
| Conjugate heat and mass transfer in metal hydride beds in the hydriding process Guo, Zhixiong; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.42, no.2, pp.379 - 382, 1999-01 |
| Cure cycle for thick glass/epoxy composite laminates Oh, JH; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.36, no.1, pp.19 - 45, 2002 |
| Development of an autoclave cure cycle with cooling and reheating steps for thick thermoset composite laminates Kim, JS; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.31, no.22, pp.2264 - 2282, 1997 |
| Effect of CO2 gasification reaction on char particle combustion in oxy-fuel conditions Kim, Dae Hee; Choi, Sangmin; Shaddix, Christopher R.; Geier, Manfred, FUEL, v.120, pp.130 - 140, 2014-03 |
| Effect of typical modeling assumptions for pulverized coal char combustion commonly used in commercial CFD codes Kim, Daehee; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.11, pp.4951 - 4961, 2015-11 |
| Effects of propane pyrolysis on basic flame structures of non-premixed jet flame Jeon, Min-Kyu; Cho, Moon Soo; Lee, Min Jung; Kim, Nam Il; Ryou, Hong Sun, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.9, pp.4053 - 4059, 2015-09 |
| Electrochemical properties and durability of in-situ composite cathodes with SmBa0.5Sr0.5Co2O5+delta for metal supported solid oxide fuel cells Irvine, John T. S.; Bae, Joongmyeon; Park, Jun-Young; Choi, Won Seok; Kim, Jung Hyun, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.42, no.2, pp.1212 - 1220, 2017-01 |
| Enhancement of effective thermal conductivity of rGO/Mg nanocomposite packed beds Kim, Dong-min; Han, Dong Ju; Heo, Tae Wook; Kang, ShinYoung; Wood, Brandon C.; Lee, Jungchul; Cho, Eun Seon; et al, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.192, 2022-08 |
| Evaluation of Ag-doped (MnCo)(3)O-4 spinel as a solid oxide fuel cell metallic interconnect coating material Lee, Kunho; Yoon, Byoung Young; Kang, Juhyun; Lee, Sanghun; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.42, no.49, pp.29511 - 29517, 2017-12 |
| EXPERT CURE SYSTEM FOR THE CARBON-FIBER EPOXY COMPOSITE-MATERIALS CHOI, JH; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.29, no.9, pp.1181 - 1200, 1995 |
| Finite element investigation of multi-phase transformation within carburized carbon steel Kang, Seong-Hoon; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.183, no.2-3, pp.241 - 248, 2007-03 |
| FUEL PYROLYSIS AND ITS EFFECTS ON SOOT FORMATION IN NON-PREMIXED LAMINAR JET FLAMES OF METHANE, PROPANE, AND DME Jeon, Min-Kyu; Kim, Nam Il, MATHEMATICAL MODELLING OF NATURAL PHENOMENA, v.13, no.6, 2018-12 |
| In situ Raman and C-13 NMR spectroscopic analysis of gas hydrates formed in confined water: application to natural gas capture Park, Juwoon; Shin, Kyuchul; Lee, Jong-Won; Lee, Huen; Seo, Yu-Taek, CANADIAN JOURNAL OF CHEMISTRY, v.93, no.9, pp.1035 - 1042, 2015-09 |
| Integrated reaction and separation in a continuous middle vessel column for enhancing indirect hydration of cyclohexene to cyclohexanol Lee, Sanghyuk; Choi, Wonyeong; Kim, Kyungjun; Chang, Daejun; Lee, Jae Woo, CHEMICAL ENGINEERING AND PROCESSING, v.123, pp.249 - 257, 2018-01 |
| Investigating the Vapor-Phase Adsorption of Aroma Molecules on the Water–Vapor Interface using Molecular Dynamics Simulations Sharma, Tonmoy; Erimban, Shakkira; Azad, Rajnish; Nam, Youngsuk; Raj, Rishi; Daschakraborty, Snehasis, LANGMUIR, v.39, no.49, pp.17889 - 17902, 2023-11 |
| Investigation of the characteristics of a compact steam reformer integrated with a water-gas shift reactor Seo, Yu Taek; Yoon, Wang Lai; Seo, Yong Seong; Seo, Dong Joo, JOURNAL OF POWER SOURCES, v.161, no.2, pp.1208 - 1216, 2006-10 |
| Joint moments and contact forces in the foot during walking Kim, Yongcheol; Lee, Kyoung Min; Koo, Seungbum, JOURNAL OF BIOMECHANICS, v.74, pp.79 - 85, 2018-06 |
| Measurement of the degree of cure of carbon fiber epoxy composite materials Kim, JS; Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.30, no.13, pp.1436 - 1457, 1996 |
| Mechanisms of direct and in-direct sulfation of limestone Jeong, Seongha; Lee, Kang Soo; Keel, Sang In; Yun, Jin Han; Kim, Yong Jin; Kim, Sang Soo, FUEL, v.161, pp.1 - 11, 2015-12 |
| Mesoscopic Modeling of Primary Recrystallization of AA1050 with Curvature-Driven Interface Migration Effect Kim, Dong-Kyu; Lee, Ho Won; Jung, Kyung-Hwan; Im, Yong-Taek, MATERIALS TRANSACTIONS, v.54, no.1, pp.81 - 89, 2013-01 |
| New phase diagram for low hysteresis response of a coiled shape memory alloy actuator Hyeon, Kyujin; Kyung, Ki-Uk, SMART MATERIALS AND STRUCTURES, v.32, no.11, 2023-11 |
| Numerical Analysis of the Heat and Mass Transfer Characteristics in an Autothermal Methane Reformer Park, Joon-Guen; Lee, Shin-Ku; Kim, Sun-Young; Bae, Joong-Myeon, JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v.7, no.5, 2010-10 |
| Numerical prediction of austenite grain size in a bar rolling process using an evolution model based on a hot compression test Jung, Kyung-Hwan; Lee, Ho-Won; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.519, no.1-2, pp.94 - 104, 2009-08 |
| ONLINE CURE MONITORING AND VISCOSITY MEASUREMENT OF CARBON-FIBER EPOXY COMPOSITE-MATERIALS Kim, J.-S.; Lee, Dai Gil, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.37, no.2016-01-04, pp.405 - 416, 1993 |
| Oxidation characteristics of airborne carbon nanoparticles by NO2 Choo, Jung-Bum; Jung, Jae-Hee; Kim, Woo-Jin; Oh, Hyun-Cheol; Kim, Jin-Ho; Kim, Hak-Joon; Kim, Yong-Jin; et al, SCIENCE OF THE TOTAL ENVIRONMENT, v.405, no.1-3, pp.396 - 401, 2008-11 |
| Prediction of welding residual stress with real-time phase transformation by CFD thermal analysis Cheon, Jason Hyeonpil; Na, Suck-Joo, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.131, pp.37 - 51, 2017-10 |
| Rapid start-up strategy of 1 kW(e) diesel reformer by solid oxide fuel cell integration Bae, Minseok; Cheon, Hyungjun; Oh, Jiwoo; Kim, Dongyeon; Bae, Joongmyeon; Katikaneni, Sai P., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.46, no.52, pp.26575 - 26581, 2021-07 |
| Robust and efficient Fe/Mn bimetal doped Pr4/3Ba2/3Co2/3Fe2/3Mn2/3O5+& delta; double perovskite catalysts for direct CO2 electrolysis Bae, Kyung Taek; Jeong, Incheol; Akromjon, Akhmadjonov; Im, Ha-Ni; Lee, Kang Taek, CHEMICAL ENGINEERING JOURNAL, v.472, 2023-09 |
| Smart cure cycles for the adhesive joint of composite structures at cryogenic temperatures Lee, Kwan Ho; Lee, Dai Gil, COMPOSITE STRUCTURES, v.86, no.1-3, pp.37 - 44, 2008-11 |
| Study of activity and effectiveness factor of noble metal catalysts for water-gas shift reaction Lim, S; Bae, Joongmyeon; Kim, K, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.34, no.2, pp.870 - 876, 2009-01 |
| The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.216, pp.348 - 356, 2015-02 |
| The increase of joint contact forces in foot joints with simulated subtalar fusion in healthy subjects Kim, Yongcheol; Kim, Jeongwon; Lee, Kyoung Min; Koo, Seungbum, GAIT & POSTURE, v.74, pp.27 - 32, 2019-10 |
| Theoretical prediction and experimental measurement of the degree of cure of anisotropic conductive films (ACFs) for chip-on-flex (COF) applications Chung, Chang-Kyu; Kwon, Yong-Min; Kim, Il; Son, Ho-Young; Choo, Kyo-Sung; Kim, Sung-Jin; Paik, Kyung-Wook, JOURNAL OF ELECTRONIC MATERIALS, v.37, no.10, pp.1580 - 1590, 2008-10 |
| Thermo-elasto-plastic finite element analysis of quenching process of carbon steel Kang, SH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.192-193, no.SI, pp.381 - 390, 2007-08 |
| Three-dimensional finite-element analysis of the quenching process of plain-carbon steel with phase transformation Kang, SH; Im, Yong-Taek, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.36A, no.9, pp.2315 - 2325, 2005-09 |
| Three-dimensional thermo-elastic-plastic finite element modeling of quenching process of plain-carbon steel in couple with phase transformation Kang, Seong-Hoon; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.49, no.4, pp.423 - 439, 2007-04 |
| Wrinkle structures formed by formulating UV-crosslinkable liquid prepolymers Park, Seung Koo; Kwark, Young-Je; Nam, Saekwang; Park, Suntak; Park, Bongje; Yun, Sungryul; Moon, Jaehyun; et al, POLYMER, v.99, pp.447 - 452, 2016-09 |
Discover
Open Access
Date issued
- 4,054 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989