Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject Heat transfer

Showing results 1 to 29 of 29

1
Design and finite volume evaluation of a counterflow recuperative spiral heat exchanger for additive manufacturing

Busch, Bastian; Caughley, Alan; Glasson, Neil; Badcock, Rodney A; Weijers, Hubertus W; Lumsden, Grant; Gschwendtner, Michael; et al, CRYOGENICS, v.127, 2022-10

2
Dropwise condensation of acetone and ethanol for a high-performance lubricant-impregnated thermosyphon

Seo, Donghyun; Shim, Jaehwan; Shin, Dong Hwan; Nam, Youngsuk; Lee, Jungho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.181, 2021-12

3
Effect of confinement on heat transfer characteristics of a microscale impinging jet

Youn, Young-Jik; Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.54, no.1-3, pp.366 - 373, 2011-01

4
Effect of pulsing parameters on drop transfer dynamics and heat transfer behavior in pulsed gas metal arc welding

Zhao, Yangyang; Lee, Phill-Seung; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.129, pp.1110 - 1122, 2019-02

5
Effects and limitations of superhydrophobic surfaces on the heat transfer performance of a two-phase closed thermosyphon

Seo, Donghyun; Park, Jinsoo; Shim, Jaehwan; Nam, Jeonghyeon; Shin, Dong Hwan; Nam, Youngsuk; Lee, Jungho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.176, pp.121446, 2021-09

6
Enhanced photovoltaic efficiency through radiative cooling augmented by a thermosyphon effect

Yoon, Siwon; Seo, Junyong; Choi, Minwoo; Lee, Bong Jae, ENERGY CONVERSION AND MANAGEMENT, v.268, 2022-09

7
Enhancing heat transfer performance of a two-phase closed thermosyphon using a polymer-coated hydrophobic condenser

Seo, Donghyun; Park, Jinsoo; Shim, Jaehwan; Nam, Jeonghyeon; Shin, Dong Hwan; Nam, Youngsuk; Lee, Jungho, APPLIED THERMAL ENGINEERING, v.196, pp.117350, 2021-09

8
Flow structure and heat transfer of a sweeping jet impinging on a flat wall

Park, Tongil; Kara, Kursat; Kim, Daegyoum, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.124, pp.920 - 928, 2018-09

9
Heat transfer and fluid flow characteristics of two-phase impinging jets

Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.25-26, pp.5692 - 5699, 2010-12

10
Heat transfer characteristics of impinging air jets under a fixed pumping power condition

Choo, Kyo-Sung; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.1-3, pp.320 - 326, 2010-01

11
Impinging sweeping jet and convective heat transfer on curved surfaces

Kim, Dong Ju; Jeong, Seyeong; Park, Tongil; Kim, Daegyoum, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.79, 2019-10

12
Influence of early drop bouncing on heat transfer during drop impact

Ko, Young Su; Kim, Jeonghwan; Ryu, Seunggeol; Han, Jeonghoon; Nam, Youngsuk; Lee, Choongyeop, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, v.137, 2022-10

13
Lifter design for enhanced heat transfer in a rotary kiln reactor

Lee, Hookyung; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.27, no.10, pp.3191 - 3197, 2013-10

14
Numerical simulation of droplet transfer behavior in variable polarity gas metal arc welding

Zhao, Yangyang; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.111, pp.1129 - 1141, 2017-08

15
Partial flow compensation by transverse bypass configuration in multi-channel cryogenic compact heat exchanger

Jung, Je-Heon; Hwang, Gyu-Wan; Baek, Seung-Whan; Jeong, Sang-Kwon; Rowe, Andrew M., CRYOGENICS, v.52, no.1, pp.19 - 26, 2012-01

16
Pressure loss effect on recuperative heat exchanger and its thermal performance

Hwang, Gyu-Wan; Jeong, Sang-Kwon, CRYOGENICS, v.50, pp.13 - 17, 2010-01

17
The effect of inclination on impinging jets at small nozzle-to-plate spacing

Choo, Kyo-Sung; Kang, Tae-Yeob; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.13-14, pp.3327 - 3334, 2012-06

18
(The) effect of inclination on impinging jets at small nozzle-to-plate spacing = 낮은 노즐-평판간 거리 영역에서 경사각이 충돌제트에 미치는 영향에 대한 실험적 연구link

Kang, Tae-Yeob; 강태엽; et al, 한국과학기술원, 2011

19
Time-dependent heat transfer in a non-uniform porous body in thoughflow = 관류중에 있는 비균질 다공물질의 비정상 열전달link

Paek, Jin-Wook; 백진욱; et al, 한국과학기술원, 1999

20
Transient thermodynamic behavior of cryogenic mixed fluid thermosiphon and its cool-down time estimation

Lee, Ji-Sung; Kim, Young-Kwon; Jeong, Sang-Kwon, CRYOGENICS, v.50, pp.352 - 358, 2010-05

21
가솔린 엔진에서 배기 온도 저감을 위한 열교환기 설계 최적화

이석환; 박정서; 배충식, 한국자동차공학회 논문집, v.15, no.3, pp.10 - 17, 2007-05

22
고체 고온처리공정 열 설계 및 성능평가 = Thermal design and performance evaluation of pyro-processing of oreslink

엄태규; Eom, Tae Gyu; et al, 한국과학기술원, 2015

23
고체 입자를 이용한 열교환기에서의 유동 및 열전달의 유한 요소 해석 = Finite element analysis of flow and heat transfer in solid particle moving beds of heat exchangerlink

이완술; Lee, Wan-Sul; et al, 한국과학기술원, 1997

24
극저온 LNG 배관냉각 특성에 대한 연구

변병창; 김경중; 정상권; 김모세; 이상윤; 이근태; 김동민, 한국수소및신에너지학회논문집, v.33, no.6, pp.808 - 818, 2022-12

25
나선형의 홈을 가진 관에서의 유동 및 열전달 해석 = Analysis of fluid flow and heat transfer in a tube with spiral grooveslink

윤세명; Yoon, Se-Myoung; et al, 한국과학기술원, 2000

26
맥동관 내부의 열전달에 관한 실험적 연구 = Experimental study on the heat transfer in pulse tubelink

김민규; Kim, Min-Gyu; et al, 한국과학기술원, 2000

27
미세 채널에서 혼합 냉매의 유동 비등 열전달에 관한 실험적 연구 = Experimental study on the flow boiling heat transfer of mixed refrigerant in a microchannellink

인세환; In, Se-Hwan; et al, 한국과학기술원, 2010

28
열전달을 고려한 스크롤 압축기내의 열역학적 냉매압축과정에 대한 연구 = Study on the thermodynamic compression process of refrigerant in the scroll compressor with heat transfer effectlink

장기태; Jang, Ki-Tae; et al, 한국과학기술원, 2006

29
파형벽면의 관내에서의 유동 및 열전달 특성 = Flow and heat transfer characteristics in ducts with wavy wallslink

조기주; Cho, Kie-Joo; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0