Browse "Dept. of Mechanical Engineering(기계공학과)" by Issue Date

Jump to a point in the index:

Showing results 30001 to 30020 of 31066

30001
소성역을 고려한 계면균열의 새로운 모델

박재학; 조종두; 엄윤용researcher, 한국항공우주학회지, v.13, no.3, pp.16 - 29, 1985-12

30002
Vortex-Induced Vibration of Long Cables

Kim, Yang-Hannresearcher; Kim, J., 대한 기계학회 '85년도 추계학술대회 , pp.318 - 322, 대한기계학회, 1985-11-09

30003
엔진 배기가스 성분 측정을 위한 Gas Chromatograph의 이용

김승수researcher; 정영교, 대한기계학회논문집 A, v.9, no.6, pp.743 - 749, 1985-11

30004
시멘트 병용 인공고관절 전치환술의 개선방안 연구

윤용산researcher, 대한의사회지, v.28, no.11, pp.1113 - 1120, 1985-11

30005
A Study of Detonation In a Rotary Engine and its Effects on Apex Seal Breakage

Sung Soo Kimresearcher, INTERNAL COMBUSTION ENGINE, v.24, no.312, pp.64 - 69, 1985-11

30006
강의 마찰용접에 미치는 탄소함량의 영향: 동종강에 대하여

나석주researcher; 김성도, 대한용접·접합학회지, v.3, no.2, pp.1 - 9, 1985-11

30007
플랜징 공정 의 성형한계 에 대한 이론 및 실험적 연구

박승교; 양동열researcher, 대한기계학회논문집A, v.9, no.6, pp.777 - 787, 1985-11

30008
PERFORMANCE OF A MODIFIED ON-OFF CONTROLLER WITH PD ACTION FOR PNEUMATIC SERVOMECHANISMS.

Cho, Hyungsuckresearcher; Lee C.W., International Symposium on Fluid Control and Measurement, pp.37 - 45, 1985-09

30009
외부 직각모서리 부근에서의 자연대류 열전달

신순철; 장근식; 김승수researcher, 대한기계학회논문집 A, v.9, no.5, pp.598 - 695, 1985-09

30010
박판 금속 성형에 있어서 곡선 절곡에 관한연구

양동열researcher; 이정우, 한국자동차공학회 1984년 학술강연회, pp.42 - 55, 한국자동차공학회, 1985-09

30011
박판금속성형에 있어서 곡선절곡에 관한 연구

양동열researcher; 이정우, 한국자동차공학회, v.7, no.3, pp.42 - 55, 1985-09

30012
Three Dimensional Contact Stress Analysis for Axisymmetric Geometry

KWAK BYUNG MANresearcher, pp.79 - 83, 1985-08-01

30013
Optimal Structural Design Considering Reliability

KWAK BYUNG MANresearcher, pp.89 - 94, 1985-08-01

30014
Replacement Arthroplastry Using the Charnley Prosthesis in Old Tuberculosis of the Hip Chinical Experience with 8-10 Year Follow-up

Kwak, Byung Manresearcher, The Young Patient with Degenerative Hip Disease, J. Sevastik and I. Galdie(ed). Almgrist & Wiksell International, pp.217 - 226, 1985-08-01

30015
A Microprocessor-Based Electrode Movement Controller for Spot Weld Quality Assurance

Cho, Hyungsuckresearcher; Chun, D. W., IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.32, no.3, pp.234 - 238, 1985-08

30016
미소 섭동 방정식을 이용한 날개-동체-꼬리날개의 천음속 유동장 해석

박승오researcher; 노세근; 김종성; 최도형researcher, 한국항공우주학회지, v.13, no.2, pp.32 - 41, 1985-08

30017
A DESIGN METHOD FOR REDUCING THE EFFECTS OF CLEARANCES AT REVOLUTE JOINTS

SHIN, JK; Kwak, Byung Manresearcher, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, v.199, no.2, pp.153 - 158, 1985-08

30018
Axisymmetric Slow Viscous Flow Due to the Motion of Two Equal Coaxial Disks

Wan-Kyun Chung; Kim, Moon Uhnresearcher, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, v.54, no.8, pp.2874 - 2882, 1985-08

30019
Valve Train Dynamic Analysis of a Diesel Engine

Hong, SM; Park, Youn-sikresearcher, JSME Vibration Conference, pp.87 - 94, 1985-07

30020
Weighted Minimum Variance Control of Servodamper System with Input Energy Constraint

Kang, M.S.; Lee, Chong-Wonresearcher, JSME Vibration Conference, pp.70 - 77, 1985-07

Discover

Type

. next

Open Access

Date issued

Subject

. next

rss_1.0 rss_2.0 atom_1.0