Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 981 to 1000 of 1858

981
Three-Dimensioinal sound source localization using Inter-Channel time difference trajectory = 채널간 시간차 궤적을 이용한 3차원 방향 검지 기법link

Lee, Sang-Moon; 이상문; et al, 한국과학기술원, 2014

982
Three-dimensional acoustic analysis of lined rectangular ducts and plenum chambers = 흡음형 덕트 및 상자의 3차원 음향 해석link

Kim, Hoi-Jeon; 김회전; et al, 한국과학기술원, 2006

983
Three-dimensional automatic mesh generation for remeshing in finite element analysis of metal forming processes = 소성가공공정의 유한요소해석을 위한 3차원 자동격자구성기법link

Lee, Young-Kyu; 이영규; et al, 한국과학기술원, 1998

984
Three-dimensional finite element analysis for the industrial extrusion processes using mismatching refinement with domain decomposition = 영역분할에 의한 격자세분화기법을 사용한 3차원 압출공정의 유한요소해석link

Park, Keun; 박근; et al, 한국과학기술원, 1999

985
Three-dimensional thermo-viscoplastic finite element analysis of hot forging = 3차원 열간단조의 열-점소성/유한요소해석link

Cho, Jong-Rae; 조종래; et al, 한국과학기술원, 1993

986
Time delay control with integral sliding surface and its application to an excavator system = 적분형 슬라이딩 면과 시간 지연을 이용한 제어기법에 관한 연구 및 굴삭기 시스템에 적용link

Lee, Sung-Uk; 이성욱; et al, 한국과학기술원, 2002

987
Time delay observer : a robust observer for nonlinear plants = 시간지연관측기 : 비선형 플랜트를 위한 강인 관측기에 관한 연구link

Lee, Jeong-Wan; 이정완; et al, 한국과학기술원, 1998

988
Time domain sound visualization using complex envelope of acoustic holography = 포락이 적용된 음향 홀로그래피를 이용한 시간영역 음장 가시화link

Park, Choon-Su; 박춘수; et al, 한국과학기술원, 2010

989
Time-dependent heat transfer in a non-uniform porous body in thoughflow = 관류중에 있는 비균질 다공물질의 비정상 열전달link

Paek, Jin-Wook; 백진욱; et al, 한국과학기술원, 1999

990
Time-varying impulse shaping to reduce vibration of flexible systems = 유연계의 진동감소를 위한 시변 임펄스 형상화link

Cho, Jung-Keun; 조중근; et al, 한국과학기술원, 1995

991
Time-varying metasurfaces for frequency shift and bandwidth manipulation of light = 빛의 주파수 편이 및 대역폭 변조를 위한 시간변화 메타표면link

Park, Jagang; Min, Bumki; et al, 한국과학기술원, 2020

992
Tip-on-aperture NSOM 프로브의 설계와 제작에 관한 연구 = A study on the design and fabrication of a tip-on-aperture near-field scanning optical microscope probelink

김진범; Kim, Jin-Beom; et al, 한국과학기술원, 2007

993
Tissue abnormality localization based on the internal structure analysis and inhomogeneous modeling = 내부구조 기반 분석과 비균질 생체 모델을 통한 이상 조직 검출 기법link

Kim, Yeong-Jin; 김영진; et al, 한국과학기술원, 2012

994
Toolpath generation and verification for optimal machining of sculptured surface = 자유곡면의 최적가공을 위한 공구경로의 생성과 검증link

Kim, Chan-Bong; 김찬봉; et al, 한국과학기술원, 1995

995
Topological elastic edge waves in two-dimensional continuum lattice = 이차원 연속체 격자 구조의 토폴로지 가장자리 탄성파link

Han, Seungjin; Oh, Il-Kwon; et al, 한국과학기술원, 2022

996
Topology optimization employing adaptive inner-front (AIF) level set method = 적응적 내부 경계를 갖는 레벨셋 방법을 이용한 위상최적화link

Park, Kang-Soo; 박강수; et al, 한국과학기술원, 2007

997
Torque estimator-based control of gear shift for shift performance increase on automatic transmissions of heavy-duty vehicles = 중부하 차량용 자동 변속기의 변속 성능 향상을 위한 토크 추정 기반 변속 제어link

Choi, Hyunseok; Choi, Seibum; et al, 한국과학기술원, 2020

998
Torque observer-based control of self-energizing clutch actuator for dual clutch transmission = 듀얼 클러치 변속기용 자기강화클러치 액추에이터의 토크 관측기 기반 제어link

Oh, Jiwon; 오지원; et al, 한국과학기술원, 2016

999
Toughening of semiconducting polymers for mechanically-robust, flexible electroactive thin films = 기계적으로 강건하고 유연한 전기활성 박막 구현을 위한 반도체 고분자의 파괴 인성 향상link

Kim, Wansun; Kim, Taek-Soo; et al, 한국과학기술원, 2020

1000
Trajectory analysis of nanoparticles under electrostatic/flow field and its application to measurements of electrical mobility = 전기장/유동장 내의 나노 입자 거동 해석 및 전기이동도 측정에의 응용link

Song, Dong-Keun; 송동근; et al, 한국과학기술원, 2005

rss_1.0 rss_2.0 atom_1.0