DSpace at KOASAS
Browsing DSpace

Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject Fracture toughness

A to Z

All 0-9

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

or enter first few letters:

Showing results 1 to 13 of 13

1
Epitaxial 박막/모재 구조물의 수직 균열에 대한 탄성 해석 = Elastic analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substratelink

이새봄; Lee, Sae-Bom; et al, 한국과학기술원, 2006

2
Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures

Nam, Soohyun; Yu, Youngho; Choi, Ilbeom; Bang, Chang Seon; Lee, Dai Gil, COMPOSITE STRUCTURES, v.107, pp.522 - 527, 2014-01

3
Fracture Toughness Measurement of Adhesively Bonded Joints at Cryogenic Temperatures

Yoon, Soon-Ho; Kim, Jin-Gyu; Hwang, Yun-Jeong; Lee, Dai-Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.26, no.7, pp.987 - 1001, 2012

4
High tensile strength of sputter-deposited ZrB2 ceramic thin films measured up to 1016 K

Sim, Gi-Dong; Choi, Yong Seok; Lee, Dongwoo; Oh, Kyu Hwan; Vlassak, Joost J., ACTA MATERIALIA, v.113, pp.32 - 40, 2016-07

5
Improvement of cryogenic performance of polyurethane adhesive joints with chopped glass fibers = 유리 단 섬유 보강을 통한 폴리우레탄 접착 조인트의 극저온 성능 향상에 관한 연구link

Nam, Soohyun; 남수현; et al, 한국과학기술원, 2015

6
Improvement of the fracture toughness of adhesively bonded stainless steel joints with aramid fibers at cryogenic temperatures

Kim, Jin-Gyu; Hwang, Yun-Jeong; Yoon, Soon-Ho; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.94, no.9, pp.2982 - 2989, 2012-09

7
Interfacial fracture analysis of adhesive-bonded joints

Kim W.-S.; Lee, Jungju, ADVANCED MATERIALS RESEARCH, v.33-37, no.0, pp.327 - 332, 2008

8
Puncture fracture in an aluminum beverage can

Yoon, Jeong Whan; Cardoso, Rui P. R.; Dick, Robert E., INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.37, no.2, pp.150 - 160, 2010-02

9
SA106 Gr.C 배관재의 파괴인성치에 미치는 동적변형시효의 영향 = Effect of dynamic strain aging on fracture toughness fo SA106 Gr.C piping steellink

김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1997

10
브리지 및 원형 멤브레인의 기계적 물성 및 계면파괴인성치 측정 = A measurement of mechanical properties and fracture toughness of bridged and circular membranelink

최우성; Choi, Woo-Sung; et al, 한국과학기술원, 2005

11
습기조건과 온도조건하에서 EMC의 파괴인성치 측정 = Measurement of fracture toughness of EMC under various moisture and temperature conditionslink

이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1996

12
접착조인트의 극저온 파괴인성 향상에 관한 연구 = A study on the improvement of fracture toughness of adhesive joints at cryogenic temperatureslink

윤순호; Yoon, Soon-Ho; et al, 한국과학기술원, 2009

13
크립손상 입은 304 스테인레스강의 피로균열 진전 거동 및 파괴인성치에 관한 연구 = A study on the fatigue crack growth behavior and the variation of Jc of the creep-damaged 304 stainless steellink

박병석; Park, Byeong-Seok; et al, 한국과학기술원, 1996

Discover

rss_1.0 rss_2.0 atom_1.0