Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 201 to 220 of 12228

201
Data-Driven Modeling for Gait Phase Recognition in a Wearable Exoskeleton Using Estimated Forces

Park, Kyeong-Won; Choi, Jungsu; Kong, Kyoungchul, IEEE TRANSACTIONS ON ROBOTICS, v.39, no.4, pp.3072 - 3086, 2023-08

202
Increase in lateral contact force in the tibiotalar joint during walking in flatfoot patients with reduced stiffness of the spring ligament

Son, Yooha; Lee, Kyoung Min; Koo, Seungbum, JOURNAL OF BIOMECHANICS, v.157, 2023-08

203
Chattering Reduction of Sliding Mode Control via Nonlinear Disturbance Observer for Anti-Lock Braking System and Verification with CarSim Simulation

Choi, Minseong; Choi, Kyunghwan; Cho, Minsu; Lee, Minyoung; Kim, Kyung-Soo, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.24, no.4, pp.1141 - 1149, 2023-08

204
High-performance piezoelectric yarns for artificial intelligence-enabled wearable sensing and classification

Kim, Dabin; Yang, Ziyue; Cho, Jaewon; Park, Donggeun; Kim, Dong Hwi; Lee, Jinkee; Ryu, Seunghwa; et al, ECOMAT, v.5, no.8, 2023-08

205
Dynamic ultraviolet harmonic beam pattern control by programmable spatial wavefront modulation of near-infrared fundamental beam

Won, Seungjai; Choi, Seungman; Kim, Taewon; Kim, Byunggi; Kim, Seung-Woo; Kim, Young-Jin, NANOPHOTONICS, v.12, no.16, pp.3373 - 3383, 2023-08

206
Battery-Free, Wireless, Cuff-Type, Multimodal Physical Sensor for Continuous Temperature and Strain Monitoring of Nerve

Kim, Seunghwan; Oh, Yong Suk; Lee, Kwanghyoung; Kim, Seongchan; Maeng, Woo-Youl; Kim, Kyung Su; Kim, Ga-Been; et al, SMALL, v.19, no.32, 2023-08

207
Intrinsically Stretchable Organic Solar Cells without Cracks under 40% Strain

Lee, Seungbok; Jeon, Yeonjee; Lee, Sang Yeon; Ma, Boo Soo; Song, Myoung; Jeong, Dahyun; Jo, Jihwan; et al, ADVANCED ENERGY MATERIALS, v.13, no.30, 2023-08

208
Outer-layer similarity and energy transfer in a rough-wall turbulent channel flow

Ma, Guo-Zhen; Xu, Chun-Xiao; Sung, Hyung Jin; Huang, Wei-Xi, JOURNAL OF FLUID MECHANICS, v.968, 2023-08

209
Enhancing the reliability of particulate matter sensing by multivariate Tobit model using weather and air quality data

Won, Wan-Sik; Noh, Jinhong; Oh, Rosy; Lee, Woojoo; Lee, Jong-Won; Su, Pei-Chen; Yoon, Yong-Jin, SCIENTIFIC REPORTS, v.13, no.1, 2023-08

210
A Mobile Two-Dimensional Ultrasound Focusing System for Personalized Healthcare Applications through a Dodecagonal Quasicrystal Patterned Planar Lens

Jeong, Yongrok; Kang, Hyeok-jung; Bok, Moonjeong; Hwang, Soon Hyoung; Jeon, Sohee; Ahn, Junseong; Ha, Ji-Hwan; et al, ADVANCED MATERIALS TECHNOLOGIES, v.8, no.16, 2023-08

211
Low-Profile, Large-Range Compressive Strain Sensing Using Micromanufactured CNT Micropillar Arrays

Cao, Changhong; Boutilier, Michael S. H.; Kim, Sanha; Taheri-Mousavi, S. Mohadeseh; Nayakanti, Nigamaa; Roberts, Ricardo; Owens, Crystal; et al, ACS APPLIED MATERIALS & INTERFACES, v.15, no.32, pp.38665 - 38673, 2023-08

212
A Physics-informed and data-driven deep learning approach for wave propagation and its scattering characteristics

Lee, Soo Young; Park, Choon-Su; Park, Keonhyeok; Lee, Hyung Jin; Lee, Seungchul, ENGINEERING WITH COMPUTERS, v.39, no.4, pp.2609 - 2625, 2023-08

213
Thermal softening behavior up to fracture initiation during high-rate deformation

Lee, Chang Soo; Yoon, Jeong Whan; Woo, Sang Hyun; Park, Lee Ju, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.251, 2023-08

214
Multimodal E-Textile Enabled by One-Step Maskless Patterning of Femtosecond-Laser-Induced Graphene on Nonwoven, Knit, and Woven Textiles

Yang, Dongwook; Nam, Han Ku; Le, Truong-Son Dinh; Yeo, Jinwook; Lee, Younggeun; Kim, Young-Ryeul; Kim, Seung-Woo; et al, ACS NANO, v.17, no.19, pp.18893 - 18904, 2023-08

215
PRTFNet: HRTF Individualization for Accurate Spectral Cues Using a Compact PRTF

Ko, Byeong-Yun; Lee, Gyeong-Tae; Nam, Hyeonuk; Park, Yong-Hwa, IEEE ACCESS, v.11, pp.96119 - 96130, 2023-08

216
Enhancing predictability of thermal warpage by applying temperature-dependent Poisson's ratio of epoxy molding compound

Kim, Junmo; Song, Myoung; Gu, Chang-Yeon; Ma, Sungwoo; Lee, Jin Hee; Lee, Woong-Sun; Kim, Taek-Soo, POLYMER TESTING, v.125, 2023-08

217
SNR enhanced high-speed two-photon microscopy using a pulse picker and time gating detection

Song, Jeonggeun; Kang, Juehyung; Kang, Ungyo; Nam, Hyeong Soo; Kim, Hyun Jung; Kim, Ryeong Hyeon; Kim, Jin Won; et al, SCIENTIFIC REPORTS, v.13, no.1, 2023-08

218
Reducing Bonding Temperature and Energy Consumption in Electronic Packaging Using Flash Electro-Thermal Carbon Fiber Heating Elements

Park, Seong Yeon; On, Seung Yoon; Kim, Junmo; Lee, Jeonyoon; Kim, Taek-Soo; Wardle, Brian L.; Kim, Seong Su, ACS APPLIED MATERIALS & INTERFACES, v.15, no.32, pp.38750 - 38758, 2023-08

219
Development of Haptic Vibration System for Steering Wheel Using Soft Actuators

Chang, Kyoung-Jin; Kim, Hyunwoo; Ma, Ji Hyeong; Kim, Minki; Nam, Jongseok; Kyung, Ki-Uk, Transactions of the Korean Society of Automotive Engineers, v.31, no.8, pp.607 - 612, 2023-08

220
Snap-through dynamics of a buckled flexible filament in a uniform flow

Mao, Qian; Liu, Yingzheng; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.969, 2023-08

rss_1.0 rss_2.0 atom_1.0