Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 1026 to 1045 of 1858

1026
X-ray meshed tomography for electronic packaging inspection = 전자부품 검사를 위한 X선 격자화 단층 촬영에 관한 연구link

Cho, Young-Bin; 조영빈; et al, 한국과학기술원, 1999

1027
XML을 활용한 최적설계 마크업 언어의 개발 및 응용 = Development and application of optimal design markup language using XMLlink

신정호; Shin, Jeong-Ho; et al, 한국과학기술원, 2005

1028
XYZ 규약에서 오일러 각을 이용한 차량동역학해석 및 구속 상이치 안정화 계수 결정 = Vehicle dynamic analysis using euler angles in XYZ convention and determination of the coefficients for the constraint violation stabilization methodlink

김종규; Kim, Jong-Kyou; 이종원; 이병호; et al, 한국과학기술원, 1989

1029
X선 영상을 이용한 물체의 삼차원 형상 복원 및 측정 = Three dimensional volume reconstruction and shape measurement of objects using X-ray imaging techniquelink

노영준; Roh, Young-Jun; et al, 한국과학기술원, 2003

1030
Y-jet 2-유체 노즐의 내부유동 특성 및 미립화 성능에 관한 연구 = Study of internal flow characteristics and atomization performance of Y-jet twin-fluid atomizerslink

송시홍; Song, Si-Hong; et al, 한국과학기술원, 1996

1031
가공 및 조립오차가 능동 자기베어링으로 지지된 축의 성능에 미치는 영향 = The influence of the machining and assembling errors on the performance of the shaft supported by active magnetic bearingslink

김대곤; Kim, Dae-Gon; et al, 한국과학기술원, 1998

1032
가변 마찰 감쇠기를 이용한 트러스 구조물의 반능동 진동 제어 = Semi-active vibration control of truss structures by variable friction damperslink

박영민; Park, Young-min; et al, 한국과학기술원, 2014

1033
가변 유압 모터를 이용한 전기유압식 속도 서보 시스템의 동특성 해석및 제어 = Dynamic analysis and control of an electrohydraulic speed servo system using variable displacement motorlink

김철수; Kim, Chul-Soo; et al, 한국과학기술원, 1996

1034
가변밸브기구와 직접분사 방식을 이용한 예혼합 압축 착화 엔진 연구 = Homogeneous charge compression ignition engine with variable valve timing and direct injectionlink

염기태; Yeom, Ki-Tae; et al, 한국과학기술원, 2007

1035
가상 운전자를 이용한 차량 시스템의 주행 시뮬레이션에 관한 연구 = Driving simulation of a vehiclesystem with an artificial driverlink

심정수; Shim, Jeong-Soo; et al, 한국과학기술원, 1993

1036
가상 절점 다각형 요소의 성능 개선과 고차 근사 확장 및 적응적 세분화로의 응용 = Performance improvement and higher-order extension of virtual node polygonal elements and their application to adaptive refinementlink

오현철; Oh, Hyeon Cheol; et al, 한국과학기술원, 2015

1037
가상 접선 벡터를 기반으로 한 모바일 로봇의 실시간 반응적 주행 = Real-time reactive navigation of mobile robots based on virtual tangential vectorlink

곽경운; Kwak, Kyung-Woon; et al, 한국과학기술원, 2013

1038
가솔린 직접 분사식 압축착화엔진에서 성층 연소 전략을 통한 성능 개선 = Performance improvement by stratified combustion strategy in gasoline direct-injection compression-ignition engineslink

김기현; Kim, Ki-Hyun; et al, 한국과학기술원, 2014

1039
가솔린 직접분사식 4행정 엔진의 성능개선에 관한 연구 = A study on the development of gasoline direct injection 4-stroke enginelink

이용표; Lee, Yong-Pyo; et al, 한국과학기술원, 1999

1040
가솔린 직접분사식 엔진용 고압선회식 분사기 노즐의 분무특성 파악 및 성능최적화 연구 = Spray characterization and performance optiminization of high pressure swirl injector nozzles for gasoline direct injection engineslink

장창수; Jang, Chang-Soo; et al, 한국과학기술원, 2000

1041
가스 질화처리된 총강 표면층의 미세균열 거동 및 스폴링 거동 = Microscopic cracking and spalling behavior of the surface layer of a gas-nitrided gun borelink

이명준; Lee, Myung-Jun; et al, 한국과학기술원, 2004

1042
가스연료엔진의 여러 가지 운전 조건하에서의 유해 배기물 측정을 통한 오존발생특성에 관한 연구 = The characterization of ozone formation under various operating conditions utilizing the measurement of exhaust gas emissions from gaseous fueled enginelink

김창업; Kim, Chang-Up; et al, 한국과학기술원, 2000

1043
가시화 급속 압축 팽창 장치에서 고속 스파크 점화 연소에 대한 선회효과 연구 = Effects of swirl on high speed S.I Combustion in an optical rapid compression and expansion machinelink

한정옥; Han, Jeong-Ok; et al, 한국과학기술원, 1992

1044
가열된 다공성 재료 표면에 충돌하는 액적의 증발거동 = Evaporation behavior of a water droplet impinging onto heated porous substrateslink

기준우; Kee, June Woo; et al, 한국과학기술원, 2016

1045
가진된 분류와 분류 확산화염의 혼합 구조에 관한 실험적 연구 = An experimental study on the structure of forced jets and jet diffusion flameslink

오세기; Oh, Sai-Kee; et al, 한국과학기술원, 1997

rss_1.0 rss_2.0 atom_1.0