Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 281 to 300 of 1858

281
Control of hybrid-type three-pole active and permanent magnetic bearing system using redundant coordinates = 잉여좌표계를 이용한 3극 전자기 및 영구자석 복합 베어링계의 제어link

Park, Sang-Hyun; 박상현; et al, 한국과학기술원, 2010

282
Control of turbulent flow for drag reduction = 항력저감을 위한 난류 유동 제어link

Choi, Jung-Il; 최정일; et al, 한국과학기술원, 2002

283
Control of turbulent separated-reattaching flow over a backward-facing step by local forcing = 국소 교란에 의한 난류 박리 재부착 유동의 제어link

Chun, Kyung-Bin; 전경빈; et al, 한국과학기술원, 1997

284
Controller design for a magnetically suspended milling spindle based on chatter stability analysis = 채터 안정도 해석에 근거한 자기베어링 밀링 주축의 제어기 설계link

Kyung, Jin-Ho; 경진호; et al, 한국과학기술원, 2003

285
Convective heat transfer enhancement in a confined passageway = 국한 유로내에서의 대류 열전달 증가에 관한 연구link

Kim, Seo-Young; 김서영; et al, 한국과학기술원, 1995

286
Copper nanowire and flower-like CuO nanostructure surfaces for enhanced boiling = 구리 나노와이어와 산화구리 꽃 형상의 나노구조 표면을 이용한 비등성능 향상link

Im, Yun-Hyeok; 임윤혁; et al, 한국과학기술원, 2010

287
Coupled bending vibration analysis of flexible rotors by using the assumed modes and substructure synthesis method = 가정 모드 및 부분 구조 합성법을 이용한 탄성 회전체의 연성 굽힘 진동 해석link

Chun, Sang-Bok; 전상복; et al, 한국과학기술원, 1996

288
Coupled transport and kinetics in the mixing region of a hydrocarbon reformer = 탄화수소 개질기 혼합 영역에서의 열유동 및 화학반응동역학 현상에 대한 연구link

Kim, Sun-Young; 김선영; et al, 한국과학기술원, 2013

289
Creep rupture and creep crack growth by diffusivegrowth of continually nucleating cavities = 연속 핵생성되는 기공의 확산성장으로 인한 크립파괴 및 크립균열전파link

Chung, Jin-Oh; 정진오; et al, 한국과학기술원, 1988

290
$Cu-ZnO/Al_2O_3$ -metal foam 촉매를 이용한 서브밀리미터 스케일 과산화수소 이용 메탄올 자열 개질기의 반응 특성 = Reaction characteristics of sub-millimeter scale autothermal methanol reformer using $Cu-ZnO/Al_2O_3$ -metal foam catalyst assisted by the decomposition of hydrogen peroxidelink

최원영; Choi, Won-Young; et al, 한국과학기술원, 2010

291
Cutting process modeling and adaptive force control of the turning process = 선반작업에서의 절삭과정 모형화와 절삭력 적응제어link

Hwang, Hong-Yeon; 황홍연; et al, 한국과학기술원, 1988

292
CWS 액적의 점화 및 연소에 관한 연구 = A study on the ignition and combustion of coal-water slurry dropletlink

안국영; Ahn, Kook-Young; et al, 한국과학기술원, 1994

293
Damping of vibration in beams and plates using curved acoustic black holes with consideration of cut-on frequency = 곡선형 음향 블랙홀의 컷온 주파수를 고려한 빔과 플레이트의 진동 감쇠link

Lee, Jae Yeon; Jeon, Wonju; et al, 한국과학기술원, 2022

294
Decelopment of an array of pressure sensors and its application to turbulent flows = 다중배열 압력센서의 개발과 난류유동장에 대한 적용link

Lee, In-Won; 이인원; et al, 한국과학기술원, 2000

295
Delamination buckling for laminated composite structures with curvature = 곡률을 갖는 복합적층구조물의 적층분리 좌굴link

Kim, Yu-Jun; 김유준; et al, 한국과학기술원, 1996

296
Design and analysis of adaptive fuzzy logic controller with dual outputs and its application to plants with time-varying dead-zone = 이중 출력 적응 퍼지 제어기의 설계 및 해석과 시변 사구간 특성을 갖는 플랜트에의 응용link

So, Sang-Ho; 소상호; et al, 한국과학기술원, 1999

297
Design and analysis of an ultraprecision rotary motor = 초정밀 회전모터의 설계와 해석에 관한 연구link

Kim, Sang-Chae; 김상채; et al, 한국과학기술원, 2000

298
Design and analysis of high speed high resolution cross structured illumination confocal microscopy = 고속 고분해능 십자 구조 조명 공초점 현미경의 설계와 분석에 관한 연구link

Ahn, Myoung-Ki; 안명기; et al, 한국과학기술원, 2011

299
Design and analysis of multi-confocal spectral imaging microscopy = 다중 공초점 분광 현미경의 설계와 분석에 관한 연구link

송인천; Song, In-Cheon; et al, 한국과학기술원, 2008

300
Design and axial position control of a small-sized active magnetic bearing with non-laminated core = 비적층 코어를 갖는 소형 전자기 베어링 설계 및 축 방향 위치 제어link

Kim, Ha-Yong; 김하용; et al, 한국과학기술원, 2004

rss_1.0 rss_2.0 atom_1.0