Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Ph.D)

Showing results 1288 to 1307 of 1858

1288
바이올린 브릿지의 위상 최적설계 = Topology optimization of violin bridgelink

유용균; Yu, Yong-Gyun; et al, 한국과학기술원, 2010

1289
박리를 수반하는 익형주위의 점성유동해석 : 격자계 생성 및 난류모델에 관한 연구 = Viscous-flow analysis about the airfoil with separation : a study on grid generation and turbulence modellink

손창현; Sohn, Chang-Hyun; et al, 한국과학기술원, 1991

1290
박막 두께 형상 및 굴절률 측정용 분산 백색광 간섭법 = Dispersive white-light interferometry for measurements of thin-film thickness profile and refractive indexlink

김영식; Ghim, Young-Sik; et al, 한국과학기술원, 2007

1291
박막 초전형 적외선 감지소자의 제작과 실리콘 기판 두께 및 구성품의 배치에 따른 성능평가에 관한 연구 = Development of thin film pyroelectric sensors and their performance evaluation in terms of silicon substrate thickness and component layoutlink

고종수; Ko, Jong-Soo; et al, 한국과학기술원, 2000

1292
박막의 신뢰성 확보를 위한 고온 환경 하에서 기계적 거동 분석 및 피로 수명 평가 = Mechanical behavior and fatigue life evaluation under elevated temperature conditions for the reliability of thin filmslink

이용석; Lee, Yong-Seok; et al, 한국과학기술원, 2017

1293
박막의 실시간 타원계측을 위한 초점형 환상(環狀) 측정 방법에 대한 연구 = Peripheral measurement method for real-time ellipsometric data acquisition of thin filmslink

예상헌; Ye, Sang-Heon; et al, 한국과학기술원, 2008

1294
박판 형 부재의 굽힘 붕괴 형상 및 붕괴 후 거동 예측 = Collapse mode estimation and post-collapse analysis of thin-walled members under bendinglink

박문식; Park, Moon-Shik; et al, 한국과학기술원, 1994

1295
박판부재의 붕괴거동해석을 위한 극한해석의 쉘요소 수식화 = Shell element formulation for limit analysis of thin-walled structureslink

김현섭; Kim, Hyun-Sup; et al, 한국과학기술원, 2000

1296
박판성형 및 충돌성능 향상을 위한 고변형률속도에서의 차체강판 성형한계도 = Forming limit diagram of auto-body steel sheets at high strain rates for sheet metal forming and crashworthinesslink

김석봉; Kim, Seok Bong; et al, 한국과학기술원, 2010

1297
박판의 자유형상 가공을 위한 레이저 성형에 관한 연구 = A study on the laser forming of sheet metal for arbitrary shapelink

김지태; Kim, Ji-Tae; et al, 한국과학기술원, 2005

1298
반도체 소자의 선폭 및 피치 측정과 불확도 산정에 관한 연구 = Linewidth and pitch measurement of semiconductor devices and uncertainty estimationlink

고영욱; Ko, Yeoung-Uk; et al, 한국과학기술원, 1998

1299
반도체 패키지 내에 존재하는 균열의 거동에 관한 연구 = A study on behavior of crack in a plastic packagelink

이혁; Lee, Hyouk; et al, 한국과학기술원, 1996

1300
반복연산에 의한 광위상간섭법의 일반알고리즘에 관한 연구 = A general algorithm of phase-shifting interferometry by iteration least squares fittinglink

공인복; Kong, In-Bok; et al, 한국과학기술원, 1995

1301
반사형 회절 격자 표식을 이용한 6자유도 변위 측정 시스템 = Six degrees of freedom displacement measurement system using a diffraction grating as a cooperative targetlink

김종안; Kim, Jong-Ahn; et al, 한국과학기술원, 2001

1302
반용융 재료의 변형거동 모델링 및 유한요소해석 = Modeling of deformation behaivor and finite element analysis of semi-solid materialslink

윤종훈; Yoon, Jong-Hoon; et al, 한국과학기술원, 2000

1303
반응 유동장 해석을 위한 다중 비정렬 유한체적 해법의 개발 = Development of a multi-level unstructured finite volume solver for reacting flowslink

이상돈; Lee, Sang-Don; et al, 한국과학기술원, 2005

1304
반응로내 미분탄과 산화제의 혼합과 연소성능에 관한 연구 = A study on the combustion performance and mixing of pulverized coal and oxidizer in a reactorlink

조한창; Cho, Han-Chang; et al, 한국과학기술원, 1999

1305
반응사출성형에 의한 폴리우레탄 미세포 포움의 가공 = Processing of polyurethane microcellular foam by the reaction injection moldinglink

박혁; Park, Hyeog; 이대길; 윤재륜; et al, 한국과학기술원, 1995

1306
반작용휠 사례를 통한 가진원 특성화에서의 매개변수법과 비매개변수법 비교 연구 = (A) comparative study on parametric and non-parametric approaches for vibration source characterization : case study on a reaction-wheellink

허균철; 김광준; et al, 한국과학기술원, 2019

1307
받음각을 갖는 2차원 익형주위 정상/비정상 난류유동장의 수치해석 = Analysis of the steady/unsteady turbulent flow about a two-dimensional airfoil at incidencelink

오창석; Oh, Chang-Seok; et al, 한국과학기술원, 1996

rss_1.0 rss_2.0 atom_1.0