Browse by Subject Optimization

Showing results 213 to 272 of 292

213
Scalable In-Memory Clustered Annealer with Temporal Noise of Charge Trap Transistor for Large Scale Travelling Salesman Problems

Ku, Anni; Hur, Jae; Luo, Yuan-Chun; LI, Hai; Nikonov, Dmitri E.; Young, Ian; Choi, Yang-Kyu; et al, IEEE JOURNAL ON EMERGING AND SELECTED TOPICS IN CIRCUITS AND SYSTEMS, v.13, no.1, pp.422 - 435, 2023-03

214
Secure Transmission for Hierarchical Information Accessibility in Downlink MU-MIMO

Lee, Kanguk; Choi, Jinseok; Kim, Dong Ku; Park, Jeonghun, IEEE TRANSACTIONS ON COMMUNICATIONS, v.70, no.9, pp.6181 - 6195, 2022-09

215
Sequential parametric convex approximation algorithm for bilinear matrix inequality problem

Lee, Donghwan; Hu, Jianghai, OPTIMIZATION LETTERS, v.13, no.4, pp.741 - 759, 2019-06

216
Shear Stress Hardening Curves of AISI 4130 Steel at Ultra-high Strain Rates with Taylor Impact Tests

Lee, Sungbo; Huh, Hoon, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.149, 2021-03

217
Short-term Predictive Power Management of PV-powered Nanogrids

Lee, Sangkeum; Jin, Hojun; Vecchietti, Luiz Felipe; Hong, Junhee; Har, Dongsoo, IEEE ACCESS, v.8, pp.147839 - 147857, 2020-08

218
Simulation and optimization of the physical absorption based carbon capture system with novel additives = 새로운 첨가제를 사용한 물리 흡수 기반 이산화탄소 포집 시스템의 시뮬레이션 및 최적화 연구link

Im, Dasom; 임다솜; et al, 한국과학기술원, 2016

219
Simulation of G/G/m-queue with multiple preventive maintenance schedules = 복수 예방보전의 스케쥴링을 이용한 G/G/m 큐의 시뮬레이션link

Park, Jung-Ho; 박정호; et al, 한국과학기술원, 2013

220
Some optimization issues in designing multimedia communication networks = 멀티미디어 통신망의 설계 최적화 문제 분석link

Hong, Jung-Man; 홍정만; et al, 한국과학기술원, 2000

221
Statistical approach to development of neovel method for lysophospholipid synthesis by lipase = 리파제를 이용한 라이소포스포리피드 합성방법 개발을 위한 통계적 접근link

Han, Jeong-Jun; 한정준; et al, 한국과학기술원, 1997

222
Structural damage detection using sparse sensors installation by optimization procedure based on the modal flexibility matrix

Hosseinzadeh, A. Zare; Amiri, G. Ghodrati; Razzaghi, S. A. Seyed; Koo, K. Y.; Sung, Seung-Hun, JOURNAL OF SOUND AND VIBRATION, v.381, pp.65 - 82, 2016-10

223
Study on optimal velocity selection using velocity obstacle (OVVO) in dynamic and crowded environment

Kim, Min-Geuk; Oh, Jun-Ho, AUTONOMOUS ROBOTS, v.40, no.8, pp.1459 - 1470, 2016-12

224
Sum Secrecy Spectral Efficiency Maximization in Downlink MU-MIMO: Colluding Eavesdroppers

Choi, Jinseok; Park, Jeonghun, IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, v.70, no.1, pp.1051 - 1056, 2021-01

225
Surrogate model for optimizing annealing duration of self-assembled membrane-cavity structures

Jeong, Mun Goung; Kim, Taeyeong; Lee, Bong Jae; Lee, Jungchul, MICRO AND NANO SYSTEMS LETTERS, v.10, no.1, 2022-06

226
System optimization on the infrastructure of the wireless power transfer(WPT) vehicle operating in multiple loop environment = 다중 노선 에서의 무선 전기자동차 인프라 시스템 최적화link

Hwang, Ill-Hoe; 황일회; et al, 한국과학기술원, 2014

227
Systematic approach for draw solute selection and optimal system design for forward osmosis desalination

Kim, Tae-Woo; Kim, Young; Yun, Choamun; Jang, Hong; Kim, Woo-Hyun; Park, Sun-Won, DESALINATION, v.284, pp.253 - 260, 2012-01

228
T-DMB 소프트웨어 모뎀 DSP 구현 및 최적화에 대한 연구 = DSP implementation of T-DMB software modem and optimizationlink

금병직; Keum, Byung-Jik; et al, 한국과학기술원, 2007

229
Techno-economic analysis of adiabatic four-stage CO2 methanation process for optimization and evaluation of power-to-gas technology

Park, Sungho; Choi, Kwangsoon; Lee, Changhyeong; Kim, Suhyun; Yoo, Youngdon; Chang, Daejun, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.46, no.41, pp.21303 - 21317, 2021-06

230
The Hardware and Algorithm Co-Design for Energy-Efficient DNN Processor on Edge/Mobile Devices

Lee, Jinsu; Kang, Sanghoon; Lee, Jinmook; Shin, Dongjoo; Han, Donghyeon; Yoo, Hoi-Jun, IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, v.67, no.10, pp.3458 - 3470, 2020-10

231
(The) accurate fluid-structure coupling techniques for high aspect ratio wings = 고 세장비 날개에 대한 정밀 유체-구조 연계기법 연구link

Jung, Kyoung-Jin; 정경진; et al, 한국과학기술원, 2010

232
(The) n-bilateral optimized combinatorial auction through a systematic combinatorial auction design methodology = 체계적인 조합경매 설계방법론에 기반한 다자간 최적화 조합경매link

Choi, Jin-Ho; 최진호; et al, 한국과학기술원, 2006

233
Thermal optimization of vertically oriented, internally finned tubes in natural convection

Joo, Younghwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.93, pp.991 - 999, 2016-02

234
Topology Optimization for the Manufacturable and Structurally Safe Synchronous Reluctance Motors with Multiple Iron Webs and Bridges

Lee, Changwoo; Lee, Jaewook; Jang, In Gwun, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.70, no.1, pp.678 - 687, 2023-01

235
Topology Optimization of the IPMSMs Considering Both the MTPA and FW Controls Under the Voltage and Current Limitations

Lee, Changwoo; Jang, In Gwun, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.70, no.8, pp.8244 - 8253, 2023-08

236
Traffic Signal Optimization for Oversaturated Urban Networks: Queue Growth Equalization

Jang, Kitae; Kim, Hyungjoo; Jang, In Gwun, IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS, v.16, no.4, pp.2121 - 2128, 2015-08

237
Transformer Network-Based Reinforcement Learning Method for Power Distribution Network (PDN) Optimization of High Bandwidth Memory (HBM)

Park, Hyunwook; Kim, Minsu; Kim, Seongguk; Kim, Keunwoo; Kim, Haeyeon; Shin, Taein; Son, Keeyoung; et al, IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, v.70, no.11, pp.4772 - 4786, 2022-11

238
Transmitter Current Control and Receiver Coil Selection in Magnetic MIMO Power Transfer Systems

Park, Sangjun; Choi, Wan, IEEE WIRELESS COMMUNICATIONS LETTERS, v.9, no.10, pp.1782 - 1785, 2020-10

239
Two stage stochastic bilevel programming model of a pre-established timberlands supply chain with biorefinery investment interests

Yeh, Kevin; Whittaker, Craig; Realff, Matthew J.; Lee, Jay Hyung, COMPUTERS & CHEMICAL ENGINEERING, v.73, pp.141 - 153, 2015-02

240
Two-direction Subgradient Method for non-differentiable Optimization Problems

Kim, S; Koh, S; Lahn, HS, Operations research letters : a journal of the Operations Research Society of America, v.6 no.1, pp.43-46, 1981-03

241
Two-phase framework for near-optimal multi-target Lambert rendezvous

Bang, Jun; Ahn, Jaemyung, ADVANCES IN SPACE RESEARCH, v.61, no.5, pp.1273 - 1285, 2018-03

242
Unit Module-Based Convergence Acceleration for Topology Optimization Using the Spatiotemporal Deep Neural Network

Joo, Younghwan; Yu, Yonggyun; Jang, In Gwun, IEEE ACCESS, v.9, pp.149766 - 149779, 2021-11

243
V2I 통신환경을 활용한 연동교차로 교통신호 실시간 제어 연구

한음; 윤일수; 이상수; 장기태; 박병규, 한국ITS학회 논문지, v.17, no.3, pp.59 - 71, 2018-06

244
XML을 활용한 최적설계 마크업 언어의 개발 및 응용 = Development and application of optimal design markup language using XMLlink

신정호; Shin, Jeong-Ho; et al, 한국과학기술원, 2005

245
가변 연속사격 시간을 고려한 근접 방어 시스템의 최적 무장 할당 알고리듬

Kim, Bosoek; Lee, Chang-Hun; Tahk, Min-Jea; Kim, Da-Sol; Kim, Sang-Hyun; Lee, Hyun-Seok, 한국항공우주학회지, v.49, no.5, pp.365 - 372, 2021-03

246
강소성 유한요소해석과 반응표면분석법을 이용한 박판성형공정에서의 드로우 비드력 최적설계

김, 세호; 허, 훈; Kim, S. H.; Huh, H.; Tezuka, A., 한국소성가공학회 춘계학술대회 논문집, pp.143-146, 1999

247
고강도강 프런트 사이드멤버의 응력분포 최적화를 통한 스프링백 저감

송정한; 박성호; 허훈; 김세호, 소성가공, v.15, no.4, pp.295 - 303, 2006-06

248
곡률 반경 변경에 의한 구조물 동특성 변경에 대한 연구 = A study on dynamic modification for a structure by varying its curvaturelink

박미유; Park, Mi-You; et al, 한국과학기술원, 2000

249
곡면 삼각 그루브를 가지는 마이크로 히트파이프의 수학적 모델링 및 열성능 최적화 = Modeling and thermal optimization of a micro heat pipe with curved triangular grooveslink

도규형; Do, Kyu-Hyung; et al, 한국과학기술원, 2002

250
공력 향상과 RCS 감소를 고려한 무인 전투기의 형상 최적설계

조영민; 최성임, 한국전산유체공학회지, v.17, no.4, pp.56 - 68, 2012-12

251
공정모니터링 데이터 분석을 위한 편최소제곱법과 인공신경망의 비교 연구 = Comparisons of partial least squares method and artificial neural network for analyzing process monitoring datalink

김영상; Kim, Young-Sang; et al, 한국과학기술원, 1999

252
광선기반 채널 환경에서 협업 Massive MIMO 네트워크를 위한 피드백 비트 할당 최적화

강진호; 최완, 한국통신학회논문지, v.46, no.3, pp.440 - 449, 2021-03

253
다중 로봇의 동적 해석과 설계에의 응용 = Dynamic analysis and application to the design of multi-arm robotlink

김충영; Kim, Choong-Young; et al, 한국과학기술원, 1997

254
다중 시각 객체 전송을 위한 최적화 적응 프래임워크

임정연; 김문철, 정보과학회논문지 : 소프트웨어 및 응용, v.35, no.4, pp.207 - 218, 2008-04

255
다중보강링을 갖는 압출금형의 치수최적설계

안성찬; 임용택, 대한기계학회논문집 A, v.26, no.10, pp.2211 - 2218, 2002-10

256
단순화 모델링을 이용한 공작기계의 변형 오차 해석 및 최적화 = Deformation error analysis and optimization of machine tool using a simplified modellink

양승욱; Yang, Seung-Uk; et al, 한국과학기술원, 1998

257
대리모델을 이용한 현가장치의 부싱 강성 곡선 최적화에 관한 연구 = A Study on the Optimization of Bushing Stiffness in Suspension System using Surrogate Modellink

김수호; 윤성기; et al, 한국과학기술원, 2017

258
반응표면법을 이용한 고속 주행용 실외 경비로봇의 현가장치 근사 최적화

고두열; 정해관; 우춘규; 김수현, 로봇학회 논문지, v.5, no.2, pp.135 - 142, 2010-06

259
복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink

김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003

260
불확실성 대응을 위한 RCD 곡선(Risk-Cost-Decentralization Curve) 기반의 물공급 시스템 분산율 최적화 방법론 개발 = Development of the guideline for optimizing decentralization of water supply system based on RCD curve (risk-cost-decentralization curve) to cope with system uncertaintylink

이현경; Lee, Hyun-Kyung; et al, 한국과학기술원, 2014

261
비정질 실리콘 태양전지의 수치해석과 유전알고리즘을 이용한 최적화 = Numerical analysis and optimization of amorphous silicon solar cells using genetic algorithmslink

전진완; Jeon, Jin-Wan; et al, 한국과학기술원, 1999

262
사장교 케이블의 최적화에 관한 연구 = The cable optimization of cable-stayed bridgeslink

이태열; Lee, Tae-Yeol; et al, 한국과학기술원, 1997

263
수치해석을 이용한 SBR공정의 최적화 = Optimization of SBR process using mathematical modellink

최은주; Choi, Eun-Ju; 김진근; 박희경; et al, 한국과학기술원, 2000

264
승용차 현가 장치의 기구학적 민감도 해석 및 최적 설계 = Kinematic sensitivity analysis and optimization of automotive suspension systemlink

진종학; Jin, Jong-Hak; et al, 한국과학기술원, 1998

265
실내 무선 환경에서의 액세스 포인트 최적 배치 기법 = Optimization technique for access point placements in indoor communications environmentslink

양석열; Yang, Seok-Youl; et al, 한국과학기술원, 2011

266
실내 무선 환경에서의 액세스 포인트 최적 배치 기법 = Optimization technique for access point placements in indoor communications environmentslink

양석열; Yang, Seok-Youl; et al, 한국과학기술원, 2011

267
원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink

오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006

268
유압식 크레인 붐의 단면 최적화에 관한 연구 = The shape optimization of hydraulic crane boomlink

정용현; Chung, Yong-Hyun; et al, 한국과학기술원, 1998

269
유연성을 고려한 날개 표면의 신뢰성 기반 최적설계 연구 = A study on the reliability based design optimization of wing surface considering wing flexibilitylink

이재훈; Lee, Jae-Hun; et al, 한국과학기술원, 2009

270
유전자 연산과 Hydraulic-Connectivity를 이용한 상수관망의 신뢰최적 설계에 관한 연구 = Reliability constrained optimal design of water distribution networks using the genetic algorithm and hydraulic-connectivitylink

신현곤; Shin, Hyun-Gon; et al, 한국과학기술원, 2000

271
유전체 분극전류의 고유함수전개를 사용한 대형 2차원 유전체의 역산란 = Inversion of large 2-D dielectric objects by using cylindrical eigenfunction expansions of its polarizationlink

김정환; Kim, Jeong-Hwan; et al, 한국과학기술원, 2000

272
유체-구조 연계 기법을 이용한 조류력 터빈의 성능 최적 설계 = Performance optimum design of a tidal current turbine using fluid-structure interaction methodlink

차명찬; Cha, Myung-Chan; et al, 한국과학기술원, 2014

rss_1.0 rss_2.0 atom_1.0