DC Field | Value | Language |
---|---|---|
dc.contributor.author | Wang, J. | ko |
dc.contributor.author | Tao, X. | ko |
dc.contributor.author | Cho, Hyungsuck | ko |
dc.date.accessioned | 2013-03-06T18:50:06Z | - |
dc.date.available | 2013-03-06T18:50:06Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2008 | - |
dc.identifier.citation | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.222, no.9, pp.1171 - 1180 | - |
dc.identifier.issn | 0954-4054 | - |
dc.identifier.uri | http://hdl.handle.net/10203/88024 | - |
dc.description.abstract | The proportional control based visual controller is the main method used in visual serving, but a small proportional gain results in a slow response, and a large proportional gain results in large overshoot or makes the system unstable. In order to improve the dynamic performance of visual servoing, a proportional differential (PD) visual controller in a microassembly system is proposed. In the proposed controller the proportional part makes the system respond faster and the differential part can improve the dynamic performance. The proportional and differential gains are tuned using a genetic algorithm to obtain optimal controller parameters. In this paper, affine transformation of the feature line is used to track the object. A series of experiments are performed on the peg and hole assembly to investigate the feasibility and effectiveness of this method. | - |
dc.language | English | - |
dc.publisher | Professional Engineering Publishing Ltd | - |
dc.subject | SERVOING METHOD | - |
dc.subject | SYSTEM | - |
dc.title | Microassembly of micro peg and hole using an optimal visual proportional differential controller | - |
dc.type | Article | - |
dc.identifier.wosid | 000260987100012 | - |
dc.identifier.scopusid | 2-s2.0-54549087686 | - |
dc.type.rims | ART | - |
dc.citation.volume | 222 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | 1171 | - |
dc.citation.endingpage | 1180 | - |
dc.citation.publicationname | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | - |
dc.identifier.doi | 10.1243/09544054JEM892 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | Cho, Hyungsuck | - |
dc.contributor.nonIdAuthor | Wang, J. | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | microassembly | - |
dc.subject.keywordAuthor | visual servoing | - |
dc.subject.keywordAuthor | visual tracking | - |
dc.subject.keywordAuthor | PD controller | - |
dc.subject.keywordAuthor | genetic algorithm | - |
dc.subject.keywordPlus | SERVOING METHOD | - |
dc.subject.keywordPlus | SYSTEM | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.