Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 19301 to 19320 of 23227

19301
원격탐지를 위한 정보해석에 관한 연구 = A study on geometric correction and unsupervised pattern recognition for remote sensinglink

최완; Choi, Wan; 박철희; 정원량; et al, 한국과학기술원, 1983

19302
원공이 있는 복합적층 평판의 좌굴 및 좌굴후 거동 = Buckling and postbuckling behavior of composite plates with a holelink

공철원; Kong, Cheol-Won; et al, 한국과학기술원, 1995

19303
원공이 존재하는 필라멘트 와인딩 압력용기의 거동해석 = Analysis of filament wound pressure vessels with holeslink

주상건; Joo, Sang-Gun; et al, 한국과학기술원, 1993

19304
원관내 열전달을 증가시키기 위한 난류강화기구에 대한 수치적 연구 = Numerical analysis of turbulent promoter for augmenting heat transfer within pipelink

김숙관; Kim, Sook-Kwan; et al, 한국과학기술원, 1990

19305
원료와 촉매 변화에 따른 Methanol-to-Propylene 공정 개선 = Retrofit design of methanol-to-propylene process for the changes in feedstock and catalystlink

홍성현; Hong, Sung-Hyun; et al, 한국과학기술원, 2008

19306
△-∑ 원리를 적용한 면적 및 전력 효율적인 정전용량 방식 터치스크린용 Read-out IC의 설계 = Design of area and power-efficient read-out ic for capacitive touch screen using △-∑ methodslink

양준혁; Yang, Jun-Hyeok; et al, 한국과학기술원, 2009

19307
원문기반 플랜트 유지보수 가이드 구축 자동화 연구 = (An) approach to automatic building of plant maintenance guide from original documentslink

김지섭; 서효원; et al, 한국과학기술원, 2018

19308
원방계 조건하에서의 레이다 성능평가를 위한 시뮬레이터 = A simulator for radar performance evaluation in a far-field test rangelink

길민영; Kil, Min-Young; et al, 한국과학기술원, 2006

19309
원심 압축기의 성능 해석을 위한 손실 모델에 대한 연구 = Study on loss models for centrifugal compressor performance analysislink

오형우; Oh, Hyoung-Woo; et al, 한국과학기술원, 1994

19310
원심모형실험과 수치해석을 이용한 과압밀 지반에서의 piled raft 기초의 지지력 평가 = Evaluation of bearing capacity of piled raft foundation on OC clay using centrifuge and numerical modelinglink

박진오; Park, Jin-Oh; et al, 한국과학기술원, 2009

19311
원심모형실험을 이용한 PVD공법용 비대칭 앵커-슈의 성능 검증에 관한 연구 = Performance evaluation of asymmetrical anchor-shoe for PVD using centrifuge model testslink

김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 2011

19312
원심분리 성형시 $α-Al_2O_3$ 첨가에 의한 Boehmite 의 소결 거동에 관한 연구 = A study on the sintering behavior of boehmite containing $α-Al_2O_3$ seed formed by centrifugal castinglink

박진우; Park, Jin-Woo; et al, 한국과학기술원, 1992

19313
원심분리법을 이용한 $SnO_2$ 가스센서의 미세구조 조절과 센서특성 = Microstructure control and sensor properties of $SnO_2$ gas sensors prepared by centrifugal coatinglink

이소라; Lee, So-Ra; 강석중; 윤덕용; et al, 한국과학기술원, 2002

19314
원심압축기 설계에 관한 기초연구 = A preliminary study on the design of a centrifugal compressorlink

박성구; Park, Seong-Koo; et al, 한국과학기술원, 1988

19315
원심압축기설계 = A study on the design of a centrifugal compressorlink

최기혁; Choi, Gi-Hyuk; et al, 한국과학기술원, 1985

19316
원유수송계획 문제의 정수계획 해법 = Integer programming approach to a crude oil transportation problemlink

최은정; Choi, Eun-Jeong; et al, 한국과학기술원, 1999

19317
원자력발전소 운전경험보고서의 특성 분석에 따른 자동분류방법 연구 = (A) study on the characteristics analysis and automatic classification method for the operating experience reports of nuclear power plantlink

최양호; 이문용; et al, 한국과학기술원, 2019

19318
원자력시설의 사이버위험 노출도 측정 모델 연구 = Research on the measurement of the cyber risk level of an nuclear facilitylink

신익현; Shin, Ick-Hyun; 임채호; Lim, Chae-Ho; et al, 한국과학기술원, 2014

19319
원자로 압력용기용 Ni-Mo-Cr계 저합금강의 합금원소 첨가량에 따른 미세조직 및 기계적 특성 평가 = Effects of alloying elements on the microstructure and mechanical properties of Ni-Mo-Cr low alloy steellink

박상규; Park, Sang-Gyu; et al, 한국과학기술원, 2008

19320
원자외선을 이용한 PPV precursor의 패턴 형성 = Pattern formation of PPV precursor by deep UVlink

윤제문; Youn, Jei-Moon; et al, 한국과학기술원, 1995

rss_1.0 rss_2.0 atom_1.0