Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 161 to 180 of 23227

161
3-D solid oxide electrolysis cell(SOEC) Co-electrolysis CFD simulation modeling and CFD analysis = 고체산화물 전기분해조(SOEC)의 co-electrolysis 3차원 전산 유체 해석 모델 개발 및 분석link

Kang, Ju-Hyun; 강주현; et al, 한국과학기술원, 2013

162
3-D 구조와 카메라 움직임의 Batch/Sequential 추정을 위한 통합적 알고리즘 = Unified algorithm for Batch/Sequential estimation of 3-D structure and motionlink

이상원; Leigh, Sang-Won; et al, 한국과학기술원, 2010

163
3-way 밸브를 갖은 전기 유압식 서어보 미케니즘의 파라미터 센시티비티에 관한 연구 = A study on parameter sensitivity of an electro-hydraulic servomechanism with three-way valve-piston combinationslink

김홍근; Kim, Hong-Kun; et al, 한국과학기술원, 1984

164
3-레벨 인버터를 사용한 무효전력 보상기의 해석 및 제어기 설계 = Analysis and controller design of static var compensator using 3-level inverterlink

조국춘; Cho, Guk-Chun; et al, 한국과학기술원, 1992

165
3-포트 피라미드 셀의 TEM 파 모드 정합 해 = TEM wave mode-matching solution for 3-port pyramid celllink

김도훈; Kim, Do Hoon; et al, 한국과학기술원, 2013

166
3.2Gb/s memory transmitter with pre-emphasis and crosstalk compensation scheme = 프리엠파시스 회로와 크로스톡 보완 구조를 포함하는 3.2Gb/s 메모리 트랜스미터link

Huh, Lynn; 허린; et al, 한국과학기술원, 2007

167
3.2Gbps multi-channel clock and data recovery circuit for chip-to-chip optical linkslink

Ngo Trong Hieu; Park, Hyo-Hoon; et al, 한국정보통신대학교, 2007

168
3.2% 규소강판의 2 차재결정에 미치는 Solute sulfur 의 영향 = The effect of solute sulfur on the secondary recrystallization in 3.2% silicon steellink

원동연; Won, Dong-Yun; et al, 한국과학기술원, 1980

169
3.5 Ni-Cr-Mo-V 강에서의 일정하중과 계단식하중 부과시의 크리프 균열 전파에 관한 연구 = Creep crack propagation under constant and step loading in 3.5 Ni-Cr-Mo-V steellink

이환철; Lee, Hwan-Chul; 강석중; 유진; et al, 한국과학기술원, 1990

170
3.5NiCrMoV강에서 일정 $C_t$ 및 일정 변위율 조건에서의 크리프 균열 전파에 관한 연구 = A study of the creep crack growth behavior in 3.5NiCrMoV steel under constant $C_t$ or constant displacement rate conditionslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1989

171
3.5wt.% NaCl 용액에서 3.5NiCr 강의 응력부식파괴 거동에 미치는 인(P)의 함량 및 tempering 온도의 영향 = Effects of P content and tempering temperature on the behaviour of stress corrosion cracking of 3.5 NiCr steel in 3.5 wt.% NaCl solutionlink

송복한; Song, Bok-Han; et al, 한국과학기술원, 1989

172
3.5wt.%NaCl 수용액에서 AISI 4340 강의 응력부식균열 전파기구에 관한 연구 = A study on the mechanism of stress-corrosion crack propagation of AISI 4340 steel in aqueous 3.5wt.% NaCl solutionlink

강인원; Kang, In-Won; et al, 한국과학기술원, 1986

173
3.5세대 이동통신기술을 이용한 교량 모니터링 시스템 구축에 관한 연구 = Bridge monitoring system using 3.5 generation mobile telecommunication technologylink

홍준영; Hong, Jun-Young; et al, 한국과학기술원, 2008

174
300 and 1200MW SFR design and multi-dimensional analysis using MARS-LMR = 300, 1200MW 소듐 고속로 설계 및 마스 코드를 이용한 다차원 해석link

Woo, Seung-Min; 우승민; et al, 한국과학기술원, 2011

175
300 and 1200MW SFR design and multi-dimensional analysis using MARS-LMR = 300, 1200MW 소듐 고속로 설계 및 마스 코드를 이용한 다차원 해석link

Woo, Seung-Min; 우승민; et al, 한국과학기술원, 2011

176
304 스테인레스강의 저온 질화에 관한 연구 = Low temperature gaseous nitriding of 304 stainless steellink

김태형; Kim, Tae-Hyung; et al, 한국과학기술원, 2008

177
304 스테인리스 강의 부식피로에 Hold time 이 미치는 영향 = Hold time effects on corrosion fatigue of type 304 stainless steellink

손상현; Son, Sang-Hyun; et al, 한국과학기술원, 1984

178
304 스텐레스강의 크립 균열 진전에 관한 실험적 연구 = An experimental study on creep crack growth for 304 stainless steelslink

방종명; Pang, Chong-Myong; et al, 한국과학기술원, 1988

179
316 Stainless steel 에서 Mo 을 W 으로 치완시 부식저항과 기계적 성질에 미치는 영향 = The effects of substituting W for Mo on corrosion resistance & mechanical properties in 316 austenitic stainless steellink

유명철; Yoo, Myung-Cheol; et al, 한국과학기술원, 1983

180
316L 모재부와 308L 용접부의 크리프-피로 특성과 용접후열처리가 용접부의 크리프-피로 특성에 미치는 영향 = Creep-fatigue properties of 316L base metal and 308L weldment and the effect of PWHT on the creep-fatigue property of the weldmentlink

황인호; Hwang, In-Ho; et al, 한국과학기술원, 2005

rss_1.0 rss_2.0 atom_1.0