Browse "College of Engineering(공과대학)" by Type Thesis(Master)

Showing results 14341 to 14360 of 23227

14341
고온 초전도체 냉각을 위한 이중 증발부 열사이펀에 대한 실험적 연구 = Experimental study on the double-evaporator thermosiphon for Cooling HTS (High Temperature Superconductor) systemlink

이정현; Lee, Jung-Hyun; et al, 한국과학기술원, 2008

14342
고온 환경에서의 스텔스 구조에 대한 전 영역 전자기 성능 평가에 관한 연구 = (A) study on the full-field evaluation of electromagnetic performance for stealth structure in high temperature environmentlink

박동진; 이정률; et al, 한국과학기술원, 2022

14343
고온/중온 소화와 혼합소화를 이용한 하수슬러지의 처리 향상 = Improved sludge treatment by TPAD and Co-digestion.link

김현우; Kim, Hyun-Woo; et al, 한국과학기술원, 2002

14344
고온가공 열처리가 AISI $300^M$ 강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of AISI $300^M$ steellink

정종훈; Jeong, Jong-Hoon; et al, 한국과학기술원, 1981

14345
고온가공열처리가 AISI H13 열간공구강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of AISI H13 hot work tool steellink

김대훈; Kim, Dae-Hun; et al, 한국과학기술원, 1980

14346
고온고압 세라믹 여과제 탈진 과정의 유동해석 = Analysis for the pulse-jet cleaning flow of a hot gas ceramic-filter elementlink

박인욱; Park, In-Wook; et al, 한국과학기술원, 1998

14347
고온벽면에 의한 수소-공기 예혼합기체의 자연발화에 관한 수치적 해석 = Numerical analysis on the autoignition of hydrogen/air mixtrue near a hot surfacelink

박은성; Park, Eun-Sung; et al, 한국과학기술원, 1991

14348
고온소성가공열처리가 고장력저합금강의 기계적성질 및 집합조직에 미치는 영향 = The effect of high temperature thermomechanical treatment on mechanical properties and texture of high strength low alloy steellink

백용기; Baek, Yong-Kee; et al, 한국과학기술원, 1979

14349
고온수소이온 전도체와 고체기준물질을 이용한 알루미늄 용탕용 전기화학식 수소탐침의 특성에 관한 연구 = An electrochemical hydrogen probe using proton conductor and solid reference for molten aluminum meltlink

박동섭; Park, Dong-Sub; et al, 한국과학기술원, 2003

14350
고온에서 304 스테인레스강의 피로-크리이프 상호작용 및 수명예측에 관한 시뮬레이션 연구 = Simulation of fatigue-creep interaction and life estimation of type 304 stainless steel at high temperaturelink

김진영; Kim, Jin-Young; et al, 한국과학기술원, 1993

14351
고온에서 보호 작용을 하는 산화막의 파손 양상과 분리 현상에 대한 해석 = An analysis on failure mode and spalling process of the protective oxide layerlink

문창오; Moon, Chang-Oh; et al, 한국과학기술원, 1992

14352
고온에서 분해되는 친환경 단일추진제용 추력기를 위한 란타늄이 도핑된 촉매 = Lanthanum doped catalyst for thruster of green monopropellant with elevated decomposition temperaturelink

이성민; Lee, Sung Min; et al, 한국과학기술원, 2015

14353
고온연소반응을 위한 Hexa-aluminate 촉매의 제조 및 반응 특성에 관한 연구 = A study on the preparation and characterization of hexa-aluminate based catalysts for high temperature combustionlink

김대철; Kim, Dae-Chul; et al, 한국과학기술원, 1995

14354
고온열처리가 측면고상결정화시킨 다결정 Si 박막의 미세구조와 박막트랜지스터 특성에 미치는 영향 연구 = Effect of high-temperature annealing on the microstructure of polycrystalline Si films crystallized by lateral growth and its effect on TFT characteriscslink

이계웅; Lee, Kye-Ung; et al, 한국과학기술원, 2003

14355
고온용 Al-Fe-V-Si/SiC 복합재료의 고온 크립특성에 관한 연구 = A study on the high temperature creep properties in Al-Fe-V-Si/SiC composite for high temperature applicationlink

김인수; Kim, In-Soo; et al, 한국과학기술원, 1991

14356
고온입자층의 하단냉각수 주입에 의한 급냉 과정의 실험적 연구 = An experimental study of quenching a hot particle bed by bottom floodinglink

강경철; Kang, Kyung-Chul; et al, 한국과학기술원, 1988

14357
고온초전도체 $YBa_2Cu_3O_{7-x}$ 에서 입계 flux slippage의 EPR연구 = An EPR investigation of grain boundary flux slippage in high Tc superconductor $YBa_2Cu_3O_{7-x}$link

이정호; Lee, Jung-Ho; et al, 한국과학기술원, 1989

14358
고용화 열처리 온도가 Fe-Mn-Al-C 합금의 상변화 및 기계적 성질에 미치는 영향 = Effect of solution-treatment temperature on austenite decomposition and mechanical property changes in austenitic Fe-Mn-Al-C alloyslink

정윤; Jeong, Yoon; et al, 한국과학기술원, 1982

14359
고울 프로세스 모델을 위한 추상 기계의 설계 = Design of an abstract machine for the goal process modellink

김형철; Kim, Hyung-Chul; et al, 한국과학기술원, 1988

14360
고유전 $(Ba,Sr)TiO_3$ 커패시터의 thermally stimulated current 분석 = Thermally stimulated current analysis of high dielectric $(Ba,Sr)TiO_3$ capacitorlink

김용주; Kim, Yong-Ju; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0