A Study on the Optimal Position for the Secondary Neutron Source in Pressurized Water Reactors

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 451
  • Download : 345
DC FieldValueLanguage
dc.contributor.authorSun, Jungwonko
dc.contributor.authorYahya, Mohd Syukriko
dc.contributor.authorKim, Yongheeko
dc.date.accessioned2017-01-09T08:08:08Z-
dc.date.available2017-01-09T08:08:08Z-
dc.date.created2017-01-09-
dc.date.created2017-01-09-
dc.date.issued2016-12-
dc.identifier.citationNUCLEAR ENGINEERING AND TECHNOLOGY, v.48, no.6, pp.1291 - 1302-
dc.identifier.issn1738-5733-
dc.identifier.urihttp://hdl.handle.net/10203/216129-
dc.description.abstractThis paper presents a new and efficient scheme to determine the optimal neutron source position in a model near-equilibrium pressurized water reactor, which is based on the OPR1000 Hanul Unit 3 Cycle 7 configuration. The proposed scheme particularly assigns importance of source positions according to the local adjoint flux distribution. In this research, detailed pin-by-pin reactor adjoint fluxes are determined by using the Monte Carlo KENO-VI code from solutions of the reactor homogeneous critical adjoint transport equations. The adjoint fluxes at each allowable source position are subsequently ranked to yield four candidate positions with the four highest adjoint fluxes. The study next simulates ex-core detector responses using the Monte Carlo MAVRIC code by assuming a neutron source is installed in one of the four candidate positions. The calculation is repeated for all positions. These detector responses are later converted into an inverse count rate ratio curve for each candidate source position. The study confirms that the optimal source position is the one with very high adjoint fluxes and detector responses, which is interestingly the original source position in the OPR1000 core, as it yields an inverse count rate ratio curve closest to the traditional 1/M line. The current work also clearly demonstrates that the proposed adjoint flux-based approach can be used to efficiently determine the optimal geometry for a neutron source and a detector in a modern pressurized water reactor core. Copyright (C) 2016, Published by Elsevier Korea LLC on behalf of Korean Nuclear Society. This is an open access article under the CC BY-NC-ND license.-
dc.languageEnglish-
dc.publisherKOREAN NUCLEAR SOC-
dc.titleA Study on the Optimal Position for the Secondary Neutron Source in Pressurized Water Reactors-
dc.typeArticle-
dc.identifier.wosid000389564700001-
dc.identifier.scopusid2-s2.0-84979649244-
dc.type.rimsART-
dc.citation.volume48-
dc.citation.issue6-
dc.citation.beginningpage1291-
dc.citation.endingpage1302-
dc.citation.publicationnameNUCLEAR ENGINEERING AND TECHNOLOGY-
dc.identifier.doi10.1016/j.net.2016.05.002-
dc.identifier.kciidART002170052-
dc.contributor.localauthorKim, Yonghee-
dc.contributor.nonIdAuthorSun, Jungwon-
dc.description.isOpenAccessY-
dc.type.journalArticleArticle-
dc.subject.keywordAuthorAdjoint Flux-
dc.subject.keywordAuthorBoron Dilution Accident-
dc.subject.keywordAuthorICRR Curve-
dc.subject.keywordAuthorMonte Carlo Analysis-
dc.subject.keywordAuthorNeutron Source-
dc.subject.keywordAuthorPWR-

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0