Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Article
Showing results 2278 to 2337 of 15679
| C-13 NMR analysis and gas uptake measurements of pure and mixed gas hydrates: Development of natural gas transport and storage method using gas hydrate Seo, Yu Taek; Lee, Huen, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.20, no.6, pp.1085 - 1091, 2003-11 |
| C-arm Image Distortion calibration method for computer-aided surgery Gibin Gil; Yoon, Yong-San, INTERNATIONAL JOURNAL OF HUMAN-FRIENDLY WELFARE ROBOTIC SYSTEMS , v.4, no.4, pp.20 - 26, 2003-01 |
| Ca(V)3.1 is a tremor rhythm pacemaker in the inferior olive Park, Young-Gyun; Park, Hye-Yeon; Lee, C. Justin; Choi, Soon-Wook; Jo, Seon-Mi; Choi, Han-Sol; Kim, Yang-Hann; et al, PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, v.107, no.23, pp.10731 - 10736, 2010-06 |
Cable Suspension and Balance System with Low Support Interference and Vibration for Effective Wind Tunnel Tests Park, Keum-Yong; Sung, Yeol-Hun; Han, Jae-Hung, INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, v.22, no.5, pp.1048 - 1061, 2021-10 |
| CAD client on smart device with drag-type buttons Kang, Yuna; Han, Soon-Hung, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, v.8, no.6, 2014 |
| CAD Data Exchange Using the Macro-Parametrics Approach: An Error Report Li, Jinggao; Han, Soonhung; Shin, Suchul; Lee, Seunghoon; Cho, Hayoung; Kim, Hyungki; Song, Ilhwan; et al, INTERNATIONAL JOURNAL OF CAD/CAM, v.10, no.2, 2011 |
| CAD 모델 교환을 위한 매크로 파라메트릭 정보의 XML 표현 양정삼; 한순흥; 김병철; 박찬국, 대한기계학회논문집 A, v.27, no.12, pp.2061 - 2071, 2003-12 |
| CAD/CAE 통합 접근을 위한 T-스플라인 유한요소법 엄태경; 김기승; 서유덕; 윤성기, 대한기계학회논문집 A, v.33, no.02, pp.127 - 134, 2009-02 |
| CAD/CAM 기술 전망 한순흥, 조선학회지, v.30, no.3, pp.34 - 40, 1993-09 |
| CAD/CAM은 살아 남을 수 있을까 ? Han, Soon-Hung, CATIA NETWORK, no.13, pp.6, 2002-04 |
| Calcium Regulation of an Actin Spring Tam, Barney K.; Shin, Jennifer Hyunjong; Pfeiffer, Emily; Matsudaira, P.; Mahadevan, L., BIOPHYSICAL JOURNAL, v.97, no.4, pp.1125 - 1129, 2009-08 |
| Calculation and verification of rotation angle of a four-axis hotwire cutter for transfer-type variable lamination manufacturing using expandable polystyrene foam Lee, SH; Ahn, DG; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.22, pp.175 - 183, 2003-09 |
| Calculation of elastic T-stresses near interface crack tip under in-plane and anti-plane loading Moon, HJ; Earmme, Youn-Young, INTERNATIONAL JOURNAL OF FRACTURE, v.91, no.2, pp.179 - 195, 1998 |
| Calculation of local stress-strain behavior at notches for non-masing material under cyclic loading Lim, JY; Lee, Soon-Bok, ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 BOOK SERIES: KEY ENGINEERING MATERIALS, v.297-300, pp.1 - 4, 2005 |
| CALCULATION OF NATURAL FREQUENCIES OF VIBRATION OF THIN ORTHOTROPIC COMPOSITE SHELLS BY ENERGY METHOD Lee, Dai Gil, JOURNAL OF COMPOSITE MATERIALS, v.22, no.12, pp.1102 - 1115, 1988-12 |
| Calculation of Planc-of-Symmetry Boundary Layers with a Modified K- Model Sohn C.H.; Chung, Myung Kyoon; Choi, Do Hyung, AIAA JOURNAL, v.29, no.3, pp.395 - 401, 1991 |
| CALCULATION OF SEPARATION-BUBBLES USING A PARTIALLY PARABOLIZED NAVIER-STOKES PROCEDURE Choi, Do Hyung; KANG, DJ, AIAA JOURNAL, v.29, no.8, pp.1266 - 1272, 1991-08 |
| Calculation of stress intensities at the interface corner of anisotropic/isotropic bonded joints with a wedge Shin, KC; Lee, Jungju, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.20, no.5, pp.411 - 425, 2006 |
| Calculation of stress intensity factor using weight function method for a patched crack Kim, J.H.; Lee, K.W.; Seo, D.C.; Lee, Soon-Bok, FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2, v.183-1, pp.103 - 108, 2000 |
| Calculation of stress intensity factor using weight function method for a patched crack with debonding region Kim, JH; Lee, Soon-Bok, ENGINEERING FRACTURE MECHANICS, v.67, no.3, pp.303 - 310, 2000-10 |
| CALCULATION OF STRESS INTENSITY FACTORS BY SENSITIVITY ANALYSIS WITH RESPECT TO CHANGE OF BOUNDARY-CONDITIONS KEUM, DJ; Kwak, Byung Man, COMPUTERS STRUCTURES, v.44, no.1-2, pp.63 - 69, 1992-07 |
| Calculation of Strongly Swirling Turbulent Round Jet Chung, Myung Kyoon, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.9, no.1, pp.62 - 68, 1988-03 |
| Calculation of Unsteady Transonic Flow over an Airfoil W.J.Chyu; S.S.Davis; Chang, Keun Sick, AIAA JOURNAL, v.19, no.6, pp.684 - 690, 1981 |
| Calibration and Noise Identification of a Rolling Shutter Camera and a Low-Cost Inertial Measurement Unit Lee, Chang-Ryeol; Yoon, Ju Hong; Yoon, Kuk-Jin, SENSORS, v.18, no.7, 2018-07 |
| Calibration and verification of the reaction rate for an insensitive PBX Park, Jung Su; Youn, Sung-Kie; Lee, Jaimin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.31, no.12, pp.6019 - 6032, 2017-12 |
| Calibration method for rotating-analyser-type spectral imaging ellipsometers Chegal, W; Cho, YJ; Oh, SB; Cho, HM; Lee, YW; Kim, Soohyun, MEASUREMENT SCIENCE & TECHNOLOGY, v.16, pp.716 - 722, 2005-03 |
| Calibration of geometric and non-geometric errors of an industrial robot Jang, JH; Kim, Soohyun; Kwak, Yoon Keun, ROBOTICA, v.19, pp.321 - 3, 2001 |
| Calibration of industrial robots with spherical joint using single wire encoder Yun, Huitaek; Jeon, Heungki; Yang, Seunghan; Jun, Martin B. G., MANUFACTURING LETTERS, v.33, pp.46 - 50, 2022-08 |
| CALS 표준 한순흥, 컴퓨터와 커뮤니케이션, v.0, pp.92 - 96, 1995-11 |
| CALS의 표준화 한순흥, 컴퓨터월드, v.0, pp.194 - 199, 1995-12 |
| Cam profile machining by triarc curve fitting Yang, Min-Yang; Shon, TY; Lee, TM, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, v.36, no.7, pp.1767 - 1778, 1998-07 |
| Camera-laser fusion sensor system and environmental recognition for humanoids in disaster scenarios Lee, Inho; Oh, Jaesung; Kim, Inhyeok; Oh, Jun-Ho, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.31, no.6, pp.2997 - 3003, 2017-06 |
| Can a Time Invariant Input Shaping Technique Eliminate Residual Vibrations of LTV Systems? Park, Juyi; Chang, Pyung Hun; Lee, Eunjeong, Proceedings of the American Control Conference, 2002-05 |
| CAN DISLOCATIONS BE ACCELERATED THROUGH SONIC BARRIER? Earmme, Youn-Young; WEINER, JH, PHYSICAL REVIEW LETTERS, v.31, no.17, pp.1055 - 1057, 1973 |
| Cancer cell migration and cancer drug screening in oxygen tension gradient chip Nam, Hyeono; Funamoto, Kenichi; Jeon, Jessie Sungyun, BIOMICROFLUIDICS, v.14, no.4, pp.044107, 2020-07 |
| Capacitive type surface-micromachined silicon accelerometer with stiffness tuning capability Park, KY; Lee, Chong-Won; Jang, HS; Oh, Y; Ha, B, SENSORS AND ACTUATORS A-PHYSICAL, v.73, no.1-2, pp.109 - 116, 1999-03 |
| Capillary performance of bi-porous sintered metal wicks Byon, Chan; Kim, Sung-Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.55, no.15-16, pp.4096 - 4103, 2012-07 |
| Capturability of 3D PPN Against Lower-Speed Maneuvering Target for Homing Phase Li, Ke-Bo; Shin, Hyo-Sang; Tsourdos, Antonios; Tahk, Min-Jea, IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, v.56, no.1, pp.711 - 722, 2020-02 |
| Capturability of 3D RTPN guidance law against true-arbitrarily maneuvering target with maneuverability limitation LI, Kebo; Bai, Zhihui; Shin, Hyo-Sang; Tsourdos, Antonios; Tahk, Min-Jea, CHINESE JOURNAL OF AERONAUTICS, v.35, no.7, pp.75 - 90, 2022-07 |
| Capture Region-based Optimal Terminal Engagement Geometry Analysis Considering High-speed Target Information Errors Ko, Hyo-Sang; Lee, Myoung-Hwa; Choi, Han-Lim, Journal of Institute of Control, Robotics and Systems, v.29, no.8, pp.572 - 583, 2023-08 |
| Carbon composite bipolar plate for high-temperature proton exchange membrane fuel cells (HT-PEMFCs) Lee, Dongyoung; Lee, Dai Gil, JOURNAL OF POWER SOURCES, v.327, pp.119 - 126, 2016-09 |
| Carbon composite hybrid bipolar plates with bypass-connected gas diffusion layers for PEM fuel cells Lim, Jun-Woo; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.95, pp.557 - 563, 2013-01 |
| Carbon fiber/polyethylene bipolar plate-carbon felt electrode assembly for vanadium redox flow batteries (VRFB) Lim, Jun Woo; Lee, Dai Gil, COMPOSITE STRUCTURES, v.134, pp.483 - 492, 2015-12 |
| Carbon nanotube film piezoresistors embedded in polymer membranes Lee, Kang-Won; Lee, Seung-Seob; Lee, Jung-A; Lee, Kwang-Cheol; Ji, Seung-Muk, APPLIED PHYSICS LETTERS, v.96, no.1, 2010-01 |
| Carbon nanotube samples prepared by an electric-field-assisted assembly method appropriate for the fabrication processes of tip-based nanodevices Choi, Jai Seong; Kwak, Yoon Keun; Kim, Soohyun, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.18, 2008-03 |
| Carbon rod missing inspection method of multidimensional carbon preform based on image processing Kim, Yongho; Lee, Jung-Ryul, ADVANCED COMPOSITE MATERIALS, v.28, no.5, pp.463 - 477, 2019-09 |
| Carbon-Fiber-Stitched Substrate in Coaxial-Fed-Patch-Antenna for Removing Hole in Feeder Jang, Woo-Hyeok; Kim, Sol; Noh, Jung-Eun; Choi, Joo-Seong; Cha, Ji-Hun; Kim, Chun-Gon, INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, v.24, no.2, pp.449 - 458, 2023-04 |
| Carbon/epoxy composite foot structure for biped robots Lee, Jinyi; Lee, Dongyoung; Park, Jongwon; Choi, Ilbeom; Lim, Jun Woo; Kim, Soohyun; Lee, Dai Gil, COMPOSITE STRUCTURES, v.140, pp.344 - 350, 2016-04 |
| Carbon/epoxy composite shielding system and effect of stuffing fabric on system performance Baluch, Abrar H; Kim, Yunho; Choi, Chunghyeon; Kim, Chun-Gon, COMPOSITE STRUCTURES, v.136, pp.182 - 190, 2016-02 |
| Carboxylate-Containing Poly(thiophene vinylene) Derivative with Controlled Molecular Weights for High-Performance Intrinsically-Stretchable Organic Solar Cells Lee, Jin-Woo; Phan, Tan Ngoc-Lan; Oh, Eun Sung; Lee, Heung-Goo; Kim, Taek-Soo; Kim, Bumjoon J., ADVANCED FUNCTIONAL MATERIALS, v.33, no.50, 2023-12 |
| Cardiovascular flow simulation at extreme scale Zhou, Min; Sahni, Onkar; Kim, Hyun Jin; Figueroa, C. Alberto; Taylor, Charles A.; Shephard, Mark S.; Jansen, Kenneth E., COMPUTATIONAL MECHANICS, v.46, no.1, pp.71 - 82, 2010-06 |
| Cardiovascular hardware simulator and artificial aorta-generated central blood pressure waveform database according to various vascular ages for cardiovascular health monitoring applications Jeong, Jae-Hak; Lee, Bomi; Hong, Junki; Min, Changhee; Persad, Adelle Ria; Yang, Tae-Heon; Park, Yong-Hwa, Computers in Biology and Medicine, v.172, 2024-04 |
| Cascade nonlinear observer design for large amplitude of slosh variables in spacecraft maneuver with liquid propellant tank Park, Jooho; Bang, Hyochoong; Park, Kyun-Sang; Lee, Seon-Ho, ACTA ASTRONAUTICA, v.213, pp.35 - 48, 2023-12 |
| Cascade 천음속 유동장에서의 적응격자 형성 정희권; 권장혁, 한국항공우주학회지, v.22, no.1, pp.14 - 19, 1994-02 |
| Cascade-type guidance law design for multiple-UAV formation keeping No, Tae Soo; Kim, Youdan; Tahk, Min-Jea; Jeon, Gyeong-Eon, AEROSPACE SCIENCE AND TECHNOLOGY, v.15, no.6, pp.431 - 439, 2011-09 |
| Catalyst preparation for fabrication of a MEMS fuel reformer Kim, T; Kwon, Sejin, CHEMICAL ENGINEERING JOURNAL, v.123, no.3, pp.93 - 102, 2006-10 |
| Catalytic combustion of lean premixed mixture in catalytically stabilized thermal combustor Seo, YS; Kang, SK; Shin, Hyun Dong, COMBUSTION SCIENCE AND TECHNOLOGY, v.145, no.1-6, pp.17 - 35, 1999 |
| Catalytic cracking of tar component from high-temperature fuel gas Dou, BL; Gao, JS; Sha, XZ; Baek, Seung-Wook, APPLIED THERMAL ENGINEERING, v.23, no.27, pp.2229 - 2239, 2003-12 |
| Catalytic pyrolysis of waste wood chip over mesoporous materials using Py-GC/MS Kim, Seung-Soo; Park, Sung Hoon; Jeon, Jong-Ki; Chang, Daejun; Kim, Sang Chai; Lee, Kyong-Hwan; Park, Young-Kwon, RESEARCH ON CHEMICAL INTERMEDIATES, v.37, no.9, pp.1355 - 1361, 2011-11 |
| Catalytic Recombination Assessment on Carbon in Dissociated Shock Tube Flow Kim, Ikhyun; Yang, Yosheph; Park, Gisu; Jo, SungMin, ACTA ASTRONAUTIC, v.181, pp.52 - 60, 2021-04 |
Discover
Open Access
Date issued
- 5,302 2020 - 2024
- 16,590 2010 - 2019
- 14,065 2000 - 2009
- 7,691 1990 - 1999
- 2,266 1980 - 1989