Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject OXIDATION
Showing results 1 to 35 of 35
| 3D Layer-By-Layer Pd-Containing Nanocomposite Platforms for Enhancing the Performance of Hydrogen Sensors Zhao, Zhi-Jun; Ko, Jiwoo; Ahn, Junseong; Bok, Moonjeong; Gao, Min; Hwang, Soon Hyoung; Kang, Hyeok-Joong; et al, ACS SENSORS, v.5, no.8, pp.2367 - 2377, 2020-08 |
| Anodic behavior of 8Y(2)O(3)-ZrO2/NiO cermet using an anode-supported electrode Baek, Seung-Wook; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.1, pp.689 - 705, 2011-01 |
| Assessment of particulate matter in exhaust gas for biodiesel and diesel under conventional and low temperature combustion in a compression ignition engine Jung, Yongjin; Hwang, Joonsik; Bae, Choongsik, FUEL, v.165, pp.413 - 424, 2016-02 |
| Characteristics of a stepwise fuel-rich/lean catalytic combustion of natural gas bearing ammonia Kang, SK; Ryu, IS; Lee, SJ; Shin, Hyun Dong; Han, HS, CATALYSIS TODAY, v.117, no.4, pp.468 - 474, 2006-10 |
| Comprehensive Assessment of Soot Particles from Waste Cooking Oil Biodiesel and Diesel in a Compression Ignition Engine Hwang, Joonsik; Jung, Yongjin; Bae, Choongsik, SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, v.8, no.2, pp.290 - 297, 2015-04 |
| Concurrent promotion of phase transition and bimetallic nanocatalyst exsolution in perovskite oxides driven by Pd doping to achieve highly active bifunctional fuel electrodes for reversible solid oxide electrochemical cells Kim, Kyeong Joon; Lim, Chaesung; Bae, Kyung Taek; Lee, Jong Jun; Oh, Mi Young; Kim, Hyung Jun; Kim, Hyunmin; et al, APPLIED CATALYSIS B-ENVIRONMENTAL, v.314, 2022-10 |
| Coupled transport and kinetics in the mixing region for hydrocarbon autothermal reforming applications Kim, Sunyoung; Dean, Anthony M.; Bae, Joongmyeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.38, no.36, pp.16140 - 16151, 2013-12 |
| Defect engineering route to boron nitride quantum dots and edge-hydroxylated functionalization for bio-imaging Jung, Jung Hwan; Kotal, Moumita; 장민호; Lee, Junseok; Cho, Yong-Hoon; Kim, Won-Jong; Oh, Il-Kwon, RSC ADVANCES, v.6, no.77, pp.73939 - 73946, 2016-07 |
| Defect-Engineered Three-Dimensional Graphene-Nanotube-Palladium Nanostructures with Ultrahigh Capacitance Sridhar, Vadahanambi; Kim, Hyun-Jun; Jung, Jung-Hwan; Lee, Changgu; Park, Sungjin; Oh, Il-Kwon, ACS NANO, v.6, no.12, pp.10562 - 10570, 2012-12 |
| Effect of typical modeling assumptions for pulverized coal char combustion commonly used in commercial CFD codes Kim, Daehee; Choi, Sangmin, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.11, pp.4951 - 4961, 2015-11 |
| Effects of Post-annealing and Co Interlayer Between SiNx and Cu on the Interfacial Adhesion Energy for Advanced Cu Interconnections Lee, Hyeonchul; Jeong, Minsu; Kim, Gahui; Son, Kirak; Seo, Jeongmin; Kim, Taek-Soo; Park, Young-Bae, ELECTRONIC MATERIALS LETTERS, v.16, no.4, pp.311 - 320, 2020-07 |
| Experimental investigation of particulate matter structures under partially premixed combustion in a compression ignition engine Chen, Hanyu; Wang, Minfei; Wang, Xi; Li, Deqiang; Pan, Zhixiang; Bae, Choongsik, FUEL, v.259, 2020-01 |
| Feasibility of low temperature solid oxide fuel cells operating on reformed hydrocarbon fuels Lee, Kang Taek; Gore, Colin M.; Wachsman, Eric D., JOURNAL OF MATERIALS CHEMISTRY, v.22, no.42, pp.22405 - 22408, 2012-11 |
| Flattening Characteristics of Ni(20)Cr Thermal-Sprayed Coating Layers on Preheated SCM415 Substrates Shin, Dong Hwan; Lee, Jae Bin; Wi, Jae Lyoung; Park, Seungil; KIM, NAM IL; Cho, Minhaeng; Kim, Jong Min; et al, MATERIALS TRANSACTIONS, v.52, no.7, pp.1515 - 1521, 2011-07 |
| High-performance Ni/Pt Composite Catalytic Anode with Ultra-Low Pt Loading for Low-temperature Solid Oxide Fuel Cells Lim, Yonghyun; Hong, Soonwook; Jang, Kyung-Lim; Yang, Hwichul; Hwang, Sehoon; Kim, Taek-Soo; Kim, Young-Beom, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, v.7, no.1, pp.141 - 150, 2020-01 |
| Highly active and stable catalyst with exsolved PtRu alloy nanoparticles for hydrogen production via commercial diesel reforming Lee, Jaemyung; Yeon, Changho; Oh, Jiwoo; Han, Gwangwoo; Do Yoo, Jeong; Yun, Hyung Joong; Lee, Chan-Woo; et al, APPLIED CATALYSIS B-ENVIRONMENTAL, v.316, 2022-11 |
| Highly conductive and stable Mn1.35Co1.35Cu0.2Y0.1O4 spinel protective coating on commercial ferritic stainless steels for intermediate-temperature solid oxide fuel cell interconnect applications Thaheem, I.; Joh, D.W.; Noh, T.; Lee, K.T., INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.44, no.8, pp.4293 - 4303, 2019-02 |
| Hydrogen sensor with a thick catalyst layer anchored on soda-lime glass Panama, Gustavo; Jo, Munhyung; Shim, Soon Seop; Kim, Min Su; Lee, Seung-Seob, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.55, no.15, pp.875 - 881, 2024-02 |
| Immaturity of soot particles in exhaust gas for low temperature diesel combustion in a direct injection compression ignition engine Jung, Yongjin; Bae, Choongsik, FUEL, v.161, pp.312 - 322, 2015-12 |
| Influence of injector spray angle and gasoline-diesel blending ratio on the low load operation in a gasoline compression ignition (GCI) engine Pinazzi, Pietro Matteo; Hwang, Joonsik; Kim, Donghoon; Foucher, Fabrice; Bae, Choongsik, FUEL, v.222, no.15, pp.496 - 505, 2018-06 |
| Interfacial properties of liquid metal immersed in various liquids Ryu, Gaabhin; Park, Kwangseok; Kim, Hyoungsoo, JOURNAL OF COLLOID AND INTERFACE SCIENCE, v.621, pp.285 - 294, 2022-09 |
Large-Area Grain-Boundary-Free Copper Films for Plasmonics Chew, Soo Hoon; Gliserin, Alexander; Choi, Sungho; Geng, Xiao Tao; KIM, Sujae; Hwang, Wooseup; Baek, Kangkyun; et al, APPLIED SURFACE SCIENCE, v.521, pp.146377, 2020-08 |
| Morphology and nano-structure of soot in diesel spray and in engine exhaust Rohani, Behzad; Bae, Choongsik, FUEL, v.203, pp.47 - 56, 2017-09 |
| Multi-artery heat pipe spreader: Experiment Hwang, G. S.; Nam, Youngsuk; Fleming, E.; Dussinger, P.; Ju, Y. S.; Kaviany, M., INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.53, no.13-14, pp.2662 - 2669, 2010-06 |
| Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, FUEL, v.235, pp.130 - 149, 2019-01 |
| On-site hydrogen production using heavy naphtha by maximizing the hydrogen output of a membrane reactor system Yoo, Jae Young; Lee, Jaemyung; Han, Gwangwoo; Harale, Aadesh; Katikaneni, Sai; Paglieri, Stephen N.; Bae, Joongmyeon, JOURNAL OF POWER SOURCES, v.508, 2021-10 |
| Optimum geometrical design for improved fuel utilization in membraneless micro fuel cell Ahmed, Dewan Hasan; Park, Hong-Beom; Sung, Hyung-Jin, JOURNAL OF POWER SOURCES, v.185, no.1, pp.143 - 152, 2008-10 |
| Photoreduction Synthesis of Hierarchical Hematite/Silver Nanostructures for Photoelectrochemical Water Splitting Kwon, Jinhyeong; Yeo, Junyeob; Hong, Sukjoon; Suh, Young D.; Lee, Habeom; Choi, Jun-ho; Lee, Seung S.; et al, ENERGY TECHNOLOGY, v.4, no.2, pp.271 - 277, 2016-02 |
| Plasmonic-Tuned Flash Cu Nanowelding with Ultrafast Photochemical-Reducing and Interlocking on Flexible Plastics Park, Jung Hwan; Han, Seungyong; Kim, Dongkwan; You, Byoung Kuk; Joe, Daniel Juhyung; Hong, Sukjoon; Seo, Jeongmin; et al, ADVANCED FUNCTIONAL MATERIALS, v.27, no.29, 2017-08 |
| Recycling silver nanoparticle debris from laser ablation of silver nanowire in liquid media toward minimum material waste Hwang, June Sik; Park, Jong-Eun; Kim, Gun Woo; Nam, Hyeono; Yu, Sangseok; Jeon, Jessie Sungyun; Kim, Sanha; et al, SCIENTIFIC REPORTS, v.11, no.1, pp.2262, 2021-01 |
| Sonochemical self-growth of functionalized titanium carbide nanorods on Ti3C2 nanosheets for high capacity anode for lithium-ion batteries Nam, Sanghee; Umrao, Sima; Oh, Saewoong; Shin, Kang Ho; Park, Ho Seok; Oh, Il-Kwon, COMPOSITES PART B-ENGINEERING, v.181, pp.107583, 2020-01 |
| The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites Han, Song Hee; Oh, Hyun Ju; Lee, Hyun Chul; Kim, Seong Su, COMPOSITES PART B-ENGINEERING, v.45, no.1, pp.172 - 177, 2013-02 |
| The geometrical design of membraneless micro fuel cells: Failure and success Ahmed, Dewan Hasan; Park, Hong-Beom; Lee, Kyung-Heon; Sung, Hyung-Jin, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.34, no.10, pp.878 - 896, 2010-08 |
| Towards high performance of supercapacitor: New approach to design 3 D architectured electrodes with bacteria Lee, Kwang Se; Kim, Sang Jun; Park, Chan Woo; Cho, Incheol; Kim, Patrick Joo Hyun; Pol, Vilas G.; Park, Inkyu; et al, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, v.78, pp.232 - 238, 2019-10 |
| Ultraviolet surface treatment for adhesion strength improvement of carbon/epoxy composite Kim, JM; Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.17, pp.1523 - 1542, 2003 |
Discover
Open Access
Date issued
- 4,060 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989