| 1 | 2상 이론을 이용한 뇌 충격의 유한 요소 해석 = Finite element analysis of brain impact by linear biphasic theorylink 박해수; Park, Hae-Soo; et al, 한국과학기술원, 1996 |
| 2 | A knee-specific finite element analysis of the human anterior cruciate ligament impingement against the femoral intercondylar notch Park, Hyung-Soon; Ahn, Chulhyun; Fung, David T.; Ren, Yupeng; Zhang, Li-Qun, JOURNAL OF BIOMECHANICS, v.43, no.10, pp.2039 - 2042, 2010-07 |
| 3 | A microstructure evolution model for numerical prediction of austenite grain size distribution Jung, KH; Lee, HW; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.9, pp.1136 - 1144, 2010-09 |
| 4 | A multi-director continuum beam finite element for efficient analysis of multi-layer strand cables Kim, Hyo-Jin; Lee, Dong-Hwa; Yoon, Kyungho; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.256, 2021-11 |
| 5 | Continuum mechanics based beam elements for linear and nonlinear analyses of multi-layered composite beams with interlayer slips Kim, Hyo-Jin; Yoon, Kyungho; Lee, Phill-Seung, COMPOSITE STRUCTURES, v.235, 2020-03 |
| 6 | Design of the composite sandwich panel of the hot pad for the bonding of large area adhesive films Yoon, Soon-Ho; Lee, Dai-Gil, COMPOSITE STRUCTURES, v.94, no.1, pp.102 - 113, 2011-12 |
| 7 | Effect of anisotropic yield functions on the accuracy of hole expansion simulations Kuwabara, Toshihiko; Hashimoto, Kazuma; Iizuka, Eiji; Yoon, Jeong Whan, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.211, no.3, pp.475 - 481, 2011-03 |
| 8 | Enhancing predictability of thermal warpage by applying temperature-dependent Poisson's ratio of epoxy molding compound Kim, Junmo; Song, Myoung; Gu, Chang-Yeon; Ma, Sungwoo; Lee, Jin Hee; Lee, Woong-Sun; Kim, Taek-Soo, POLYMER TESTING, v.125, 2023-08 |
| 9 | Evaluation of ultimate buckling strength of stiffened plates for marine structures = 해양구조물용 보강판구조의 좌굴한계강도 평가link Gul, Waseem; Huh, Hoon; et al, 한국과학기술원, 2010 |
| 10 | Experimental and numerical analysis of a parabolic reflector with a radiant heat source Lee, Eun Ho; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.85, pp.860 - 864, 2015-06 |
| 11 | Finite Element Analysis of an Adhesive Joint Using the Cohesive Zone Model and Surface Pattern Design of Bonding Surfaces Lee, Min-Jung; Lim, Jong-Min; Lee, Byung-Chai, JOURNAL OF ADHESION, v.89, no.3, pp.205 - 224, 2013-03 |
| 12 | Finite element analysis of high-velocity multi-blow forging processes using explicit time integration scheme = 외연적 시간적분 기법을 이용한 고속 다타격 단조공정의 유한요소해석link Yoo, Yo-Han; 유요한; et al, 한국과학기술원, 1997 |
| 13 | Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography Jeon, I; Asahina, T; Kang, KJ; Im, Seyoung; Lu, TJ, MECHANICS OF MATERIALS, v.42, pp.227 - 236, 2010-03 |
| 14 | Flow characteristics of continuous shear drawing of high carbon steel Hwang, SK; Jin, YG; Son, IH; Rhee, KH; Lee, DL; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.53, no.6, pp.479 - 484, 2011-06 |
| 15 | Machine learning-based constitutive model for J2- plasticity Jang, DP; Fazily, Piemaan; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.138, pp.102919, 2021-03 |
| 16 | Machine learning-driven stress integration method for anisotropic plasticity in sheet metal forming Fazily, Piemaan; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.166, 2023-07 |
| 17 | Mechanism of crack initiation and propagation in high-alloy steel slabs during the cooling and scarfing processes after the continuous casting process Lee, Yong-Seok; Kim, Seongwoo; Jang, Dong-Won; Lee, Soon-Bok, MECHANICS OF MATERIALS, v.166, 2022-03 |
| 18 | Mesh coarsening using the phantom-node method in the phase field model Kim, Gihwan; Lee, Phill-Seung, FINITE ELEMENTS IN ANALYSIS AND DESIGN, v.228, 2024-01 |
| 19 | Modeling of helically stranded cables using multiple beam finite elements and its application to torque balance design Kim, Sung Yun; Lee, Phill-Seung, CONSTRUCTION AND BUILDING MATERIALS, v.151, pp.591 - 606, 2017-10 |
| 20 | Numerical analysis of the process-induced residual stress in fiber-reinforced composite materials = 복합재 제조 공정 시 발생되는 잔류 응력 해석link Cisse Cheikh; Cisse Cheikh; Lee, In; et al, 한국과학기술원, 2013 |
| 21 | Numerical and experimental investigation of a complete contact problem by comparing with an asymptotic analysis Jang, Jae-Won; Kim, Hyung-Kyu; Lee, Soon-Bok, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.82, pp.39 - 46, 2016-03 |
| 22 | Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector Lee, Eun Ho; Yang, Dong-Yol; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.78, pp.240 - 250, 2014-11 |
| 23 | Numerical prediction of austenite grain size in a bar rolling process using an evolution model based on a hot compression test Jung, Kyung-Hwan; Lee, Ho-Won; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.519, no.1-2, pp.94 - 104, 2009-08 |
| 24 | Numerical study on the evolution of surface defects in wire drawing Baek, Hyun-Moo; Jin, Young-Gwan; Hwang, Sun-Kwang; Im, Yong-Taek; Son, Il-Heon; Lee, Duk-Lak, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.4, pp.776 - 785, 2012-04 |
| 25 | Optimum design of aramid-phenolic/glass-phenolic composite journal bearings Yu, Ha-Na; Kim, Seong Su; Lee, Dai-Gil, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.40, no.8, pp.1186 - 1191, 2009-08 |
| 26 | Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion , Proceedings of International Conference on Advanced Forming and Die Manufacturing Technology, Busan, September 2006, 2007-06-12 |
| 27 | The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, CM; Lee, Ho Won, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.7, pp.1398 - 1407, 2014-07 |
| 28 | The strain-smoothed 4-node quadrilateral finite element Lee, Chaemin; Kim, San; Lee, Phill-Seung, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.373, pp.113481, 2021-01 |
| 29 | Thermo-mechanical reliability evaluation of thin electronic packages with high density interconnects = 고집적 연결부를 가진 얇은 전자 패키지의 열적 기계적 신뢰성 평가link Jang, Jae-Won; 장재원; et al, 한국과학기술원, 2014 |
| 30 | Towards improving the 2D-MITC4 element for analysis of plane stress and strain problems Choi, Hyung-Gyu; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.275, 2023-01 |
| 31 | 고체 입자를 이용한 열교환기에서의 유동 및 열전달의 유한 요소 해석 = Finite element analysis of flow and heat transfer in solid particle moving beds of heat exchangerlink 이완술; Lee, Wan-Sul; et al, 한국과학기술원, 1997 |
| 32 | 유한요소해석과 다구치방법을 이용한 에너지 저장형 의족의 설계에 대한 연구 = A study on the design of energy storing prosthetic foot for the below-knee amputee using the finite element analysis and the Taguchi methodlink 이동희; Lee, Dong-Hee; et al, 한국과학기술원, 1999 |
| 33 | 응집 영역 모델을 이용한 접착 조인트의 유한요소해석과 마이크로 패턴 설계를 통한 접착 강도 향상 = Finite element analysis of the adhesive joint using the cohesive zone model and adhesive strength improvement by the micro-pattern designlink 이민정; Lee, Min-Jung; et al, 한국과학기술원, 2013 |
| 34 | 차량 구조용 접착제를 이용한 접합부의 복합하중조건에서 동적 파단 특성 연구 = Study on the dynamic failure model for structural adhesive joints under combined loading conditionslink 임승찬; Lim, Seung-Chan; et al, 한국과학기술원, 2012 |
