Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject DESIGN
Showing results 1 to 60 of 396
9.4 MHz A-line rate optical coherence tomography at 1300nm using a wavelength-swept laser based on stretched-pulse active mode-locking Kim, Tae Shik; Joo, JongYoon; Shin, Inho; Shin, Paul; Kang, Woo Jae; Vakoc, Benjamin J.; Oh, Wang-Yuhl, SCIENTIFIC REPORTS, v.10, no.1, 2020-06 |
| A bio-inspired, low pressure drop liquid cooling system for high-power IGBT modules for EV/HEV applications Ki, Seokkan; Lee, Jooyoung; Ryu, Seunggeol; Bang, Soosik; Kim, Kichong; Nam, Youngsuk, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, v.161, 2021-03 |
| A biomimetic elastomeric robot skin using electrical impedance and acoustic tomography for tactile sensing Park, K; Yuk, H; Yang, M; Cho, J; Lee, H; Kim, Jung, SCIENCE ROBOTICS, v.7, no.67, 2022-06 |
| A calibrated atomic force microscope using an orthogonal scanner and a calibrated laser interferometer Lee, Dong-Yeon; Kim, Dong-Min; Gweon, Dae-Gab; Park, Jinwon, APPLIED SURFACE SCIENCE, v.253, no.8, pp.3945 - 3951, 2007-02 |
| A channel layout of a micro pulsating heat pipe for an excessively localized heating condition Lim, Jonghyun; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.196, 2021-09 |
| A Closed-Form Solution to Asymmetric Motion Profile Allowing Acceleration Manipulation Rew, KH; Kim, Kyung-Soo, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.57, pp.2499 - 2506, 2010-07 |
| A Compliant Hybrid Zero Dynamics Controller for Stable, Efficient and Fast Bipedal Walking on MABEL Sreenath, Koushil; Park, Hae-Won; Poulakakis, Ioannis; Grizzle, J. W., INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, v.30, no.9, pp.1170 - 1193, 2011-08 |
| A composite cantilever arm for guiding a moving wire in an electrical discharge wire cutting machine Lee, CS; Oh, JH; Lee, Dai Gil; Choi, JH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.172 - 177, 2001-06 |
| A driver model for vehicle lateral dynamics Moon, Chulwoo; Choi, Seibum B, INTERNATIONAL JOURNAL OF VEHICLE DESIGN, v.56, no.1-4, pp.49 - 80, 2011 |
| A Finger Grip Force Sensor with an Open-Pad Structure for Glove-Type Assistive Devices Park, Junghoon; Heo, Pilwon; Kim, Jung; Na, Youngjin, SENSORS, v.20, no.1, 2020-01 |
| A High-Precision Motion Control Based on a Periodic Adaptive Disturbance Observer in a PMLSM Cho, Kwanghyun; Kim, Jong Hwa; Choi, Seibum B; Oh, Sehoon, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.5, pp.2158 - 2171, 2015-10 |
| A highly stretchable optical strain sensor monitoring dynamically large strain for deformation-controllable soft actuator Yun, Sungryul; Jeong, Jaeyeon; Mun, Seongcheol; Kyung, Ki-Uk, SMART MATERIALS AND STRUCTURES, v.30, no.10, 2021-10 |
| A master manipulator with a remote-center-of-motion kinematic structure for a minimally invasive robotic surgical system Lee, Hyunyoung; Cheon, Byungsik; Hwang, Minho; Kang, Dong-Hoon; Kwon, Dong-Soo, INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY, v.14, no.1, 2018-02 |
| A method and tool for human-human interaction and instant collaboration in CSCW-based CAD He, Fazhi; Han, Soonhung, COMPUTERS IN INDUSTRY, v.57, no.8-9, pp.740 - 751, 2006-12 |
| A method for topological entity correspondence in a replicated collaborative CAD system Jing, Shu-xu; He, Fa-zhi; Han, Soonhung; Cai, Xian-tao; Liu, Hua-Jun, COMPUTERS IN INDUSTRY, v.60, no.7, pp.467 - 475, 2009-09 |
| A method to exchange procedurally represented 2D CAD model data using ISO 10303 STEP Kim, Byung Chul; Mun, Duhwan; Han, Soonhung; Pratt, Michael J., COMPUTER-AIDED DESIGN, v.43, no.12, pp.1717 - 1728, 2011-12 |
| A multichannel visualization module for virtual manufacturing Kim, Yong-Sik; Yang, Jeongsam; Han, Soonhung, COMPUTERS IN INDUSTRY, v.57, no.7, pp.653 - 662, 2006-09 |
| A multiple-shape memory polymer-metal composite actuator capable of programmable control, creating complex 3D motion of bending, twisting, and oscillation Shen, Qi; Trabia, Sarah; Stalbaum, Tyler; Palmre, Viljar; Kim, Kwang; Oh, Il-Kwon, SCIENTIFIC REPORTS, v.6, no.-, 2016-04 |
| A neural network approach to estimate the top speed and trainset configuration of a high-speed train Lee, J; Han, Soonhung, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, v.218, no.1, pp.41 - 49, 2004-03 |
| A new macro/micro robotic probing system for the in-circuit test of PCBs Shim, JH; Cho, Hyungsuck, MECHATRONICS, v.9, no.6, pp.589 - 613, 1999-09 |
| A new magnetic bearing using Halbach magnet arrays for a magnetic levitation stage Choi, Young-Man; Lee, Moon G.; Gweon, Dae-Gab; Jeong, Jaehwa, REVIEW OF SCIENTIFIC INSTRUMENTS, v.80, no.4, 2009 |
| A nonlinearity integrated bi-fidelity surrogate model based on nonlinear mapping Li, Kunpeng; Li, Qingye; Lv, Liye; Song, Xueguan; Ma, Yunsheng; Lee, Ikjin, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.66, no.9, 2023-09 |
| A Novel Boil-Off Gas Re-Liquefaction Using a Spray Recondenser for Liquefied Natural-Gas Bunkering Operations Ryu, Jiheon; Lee, Chihun; Seo,Yutaek; Kim, Jun Young; Seo, Suwon; Chang, Daejun, ENERGIES, v.9, no.12, 2016-12 |
| A Novel Passive Quasi-Zero Stiffness Isolator for Ultra-Precision Measurement Systems Kim, Jangheon; Jeon, Youngjun; Um, Sangwoo; Park, Usung; Kim, Kyung-Soo; Kim, Soohyun, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.20, no.9, pp.1573 - 1580, 2019-09 |
| A Novel Pneumatic Generator with Pressure-Feedback Mechanism for Self-Injection of Hydrogen Peroxide Hong, Yun-Pyo; Kim, Kyung Rok; Kim, Kyung-Soo; Kim, Soohyun, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.22, no.5, pp.1992 - 2002, 2017-10 |
| A novel sampling method for adaptive gradient-enhanced Kriging Lee, Mingyu; Noh, Yoojeong; Lee, Ikjin, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.418, 2024-01 |
| A passively adaptive variable-radius pulley for a tendon-driven robotic joint Park, Jihyuk; Kim, Ji-Chul; Nguyen, Chanh D. Tr; Kim, Kyung-Soo; Kim, Soohyun, MECHANISM AND MACHINE THEORY, v.128, pp.110 - 124, 2018-10 |
| A practically efficient method for motion control based on asymmetric velocity profile Rew, Keun-Ho; Ha, Chang-Wan; Kim, Kyung-Soo, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.49, pp.678 - 682, 2009-06 |
| A precision desktop plate-to-roll apparatus for development of advanced flexographic printing processes Mariappan, Dhanushkodi D.; Kim, Sanha; Hart, A. John, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, v.66, pp.392 - 400, 2020-11 |
| A procedural method to exchange editable 3D data from a free-hand 2D sketch modeling system into 3D mechanical CAD systems Cheon, Sang-Uk; Kim, Byung Chul; Mun, Duhwan; Han, Soonhung, COMPUTER-AIDED DESIGN, v.44, no.2, pp.123 - 131, 2012-02 |
| A psychophysical evaluation of haptic controllers: viscosity perception of soft environments Son, Hyoung Il; Jung, Hoeryong; Lee, Doo Yong; Cho, Jang Ho; B¨ulthoff, Heinrich H., ROBOTICA, v.32, no.1, pp.1 - 17, 2014-01 |
| A radioisotope thermophotovoltaic converter with nanophotonic emitters and filters Lee, Junghun; Cheon, Seongjae; Hong, Sergi; Nam, Youngsuk, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.108, pp.1115 - 1125, 2017-05 |
| A robust torque control approach for gear shift of a parallel hybrid electric vehicle with dual clutch transmission Kim, Sooyoung; Choi, Seibum, NOISE CONTROL ENGINEERING JOURNAL, v.68, no.5, pp.399 - 405, 2020-09 |
| A six-degree-of-freedom magnetic levitation fine stage for a high-precision and high-acceleration dual-servo stage Kim, Myeong-Hyeon; Jeong, Jae Heon; Kim, HyoYoung; Gweon, Dae-Gab, SMART MATERIALS AND STRUCTURES, v.24, no.10, 2015-10 |
| A soft microchannel decreases polydispersity of droplet generation Pang, Yan; Kim, Hyoungsoo; Liu, Zhaomiao; Stone, Howard A., LAB ON A CHIP, v.14, no.20, pp.4029 - 4034, 2014-10 |
| A Solution to the Accuracy/Robustness Dilemma in Impedance Control Kang, Sang Hoon; Jin, Maolin; Chang, Pyung-Hun, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.14, no.3, pp.282 - 294, 2009-06 |
| A strip speaker using the traveling bending wave on a beam controlled by three actuators Lee, Ki-Ho; Ih, Jeong-Guon; Jung, Dong hyun, JOURNAL OF SOUND AND VIBRATION, v.504, 2021-07 |
| A study on the microwave absorbing honeycomb core embedded with conductive periodic patterned surfaces for the effective dielectric constant Baek, Sang Min; Lee, Won Jun; Kim, Sang Yong; Kim, Seong Su, COMPOSITE STRUCTURES, v.289, 2022-06 |
| A Systematic Method for Gain Selection of Robust PID Control for Nonlinear Plants of Second-Order Controller Canonical Form Chang, Pyung Hun; Jung, Je Hyung, IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, v.17, no.2, pp.473 - 483, 2009 |
| A three-dimensional fracture pattern diagram of staggered platelet structures Kim, Youngsoo; Jeong, Heeyeong; Gu, Grace X.; Ryu, Seunghwa, COMPOSITE STRUCTURES, v.220, pp.769 - 775, 2019-07 |
| Active muscle stiffness sensor based on piezoelectric resonance for muscle contraction estimation Han, Hyon-Young; Kim, Jung, SENSORS AND ACTUATORS A-PHYSICAL, v.194, pp.212 - 219, 2013-05 |
| Adaptive Engagement Control of a Self-Energizing Clutch Actuator System Based on Robust Position Tracking Kim, Jinsung; Choi, Seibum B.; Oh, Jiwon J., IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.23, no.2, pp.800 - 810, 2018-04 |
| Adaptive Model-Mediated Teleoperation for Tasks Interacting With Uncertain Environment Kim, Cheongjun; Lee, Doo Yong, IEEE ACCESS, v.9, pp.128188 - 128201, 2021-09 |
| Adaptive Scheme for the Real-Time Estimation of Tire-Road Friction Coefficient and Vehicle Velocity Han, Kyoungseok; Lee, Eunjae; Choi, Mooryong; Choi, Seibum B., IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.22, no.4, pp.1508 - 1518, 2017-08 |
| Additive manufacturing of flexible 3D surface electrodes for electrostatic adhesion control and smart robotic gripping Kim, Dong Geun; Je, Hyeongmin; Hart, A. John; Kim, Sanha, FRICTION, v.11, no.11, pp.1974 - 1986, 2023-11 |
| An Active Zooming Strategy for Variable Field of View and Depth of Field in Vision-Based Microassembly Tao, Xiaodong; Janabi-Sharifi, Farrokh; Cho, Hyungsuck, IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, v.6, no.3, pp.504 - 513, 2009 |
| An education model of a nano-positioning system for mechanical engineers Lee, Dong-Yeon; Gweon, Dae-Gab, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.20, no.10, pp.1702 - 1715, 2006-10 |
| An efficient approach to directly compute the exact Hausdorff distance for 3D point sets Zhang, Dejun; He, Fazhi; Han, Soonhung; Zou, Lu; Wu, Yiqi; Chen, Yilin, INTEGRATED COMPUTER-AIDED ENGINEERING, v.24, no.3, pp.261 - 277, 2017 |
| An energy-efficient battery thermal management system incorporating a porous metal-based multiscale flow manifold Ki, Seokkan; Lee, Jooyoung; Kim, Seungwoo; Seong, Jeongmo; Shim, Jaehwan; Oh, Seungtae; Cho, Sumin; et al, ENERGY CONVERSION AND MANAGEMENT, v.269, 2022-10 |
| An extended analytic model for the elastic properties of platelet-staggered composites and its application to 3D printed structures Kim, Youngsoo; Kim, Yongtae; Lee, Tae-Ik; Kim, Taek-Soo; Ryu, Seunghwa, COMPOSITE STRUCTURES, v.189, pp.27 - 36, 2018-04 |
| An impulse-time perturbation approach for enhancing the robustness of extra-insensitive input shapers Rew, Keun-Ho; Ha, Chang-Wan; Kim, Kyung-Soo, AUTOMATICA, v.49, no.11, pp.3425 - 3431, 2013-11 |
| An integrated prediction model including the cutting process for virtual product development of machine tools Lee, Chang-Ho; Yang, Min-Yang; Oh, Chang-Won; Gim, Tae-Weon; Ha, Jae-Yong, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.90, pp.29 - 43, 2015-03 |
| Analogy of Strain Energy Density Based Bone-Remodeling Algorithm and Structural Topology Optimization Jang, In Gwun; Kim, Il Yong; Kwak, Byung Man, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.131, no.1, 2009-01 |
| Analysis of Halbach magnet array and its application to linear motor Lee, MG; Lee, SQ; Gweon, Dae-Gab, MECHATRONICS, v.14, no.1, pp.115 - 128, 2004-02 |
| Analysis on the performance of a flat-plate volumetric solar collector using blended plasmonic nanofluid Jeon, Jongwook; Park, Sunho; Lee, Bong Jae, SOLAR ENERGY, v.132, pp.247 - 256, 2016-07 |
| Analytical and Psychophysical Comparison of Bilateral Teleoperators for Enhanced Perceptual Performance Son, Hyoung Il; Cho, Jang Ho; Bhattacharjee, Tapomayukh; Jung, Hoeryong; Lee, Doo Yong, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, v.61, no.11, pp.6202 - 6212, 2014-11 |
| AnH(infinity)Design of Disturbance Observer for a Class of Linear Time-invariant Single-input/Single-output Systems Seo, Hyung-Tae; Kim, Soohyun; Kim, Kyung-Soo, INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, v.18, no.7, pp.1662 - 1670, 2020-07 |
| Anthropomorphic Prosthetic Hand Inspired by Efficient Swing Mechanics for Sports Activities Chang, Mun Hyeok; Kim, Dong Hyun; Kim, Sang-Hun; Lee, Yechan; Cho, Seongyun; Park, Hyung-Soon; Cho, Kyu-Jin, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.27, no.2, pp.1196 - 1207, 2022-04 |
| Application of laser joining process for elimination of stair steps in steel laminate tooling Yoon, SH; Na, Suck-Joo, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.25, pp.154 - 159, 2005-01 |
| Application of parallel processing in three-dimensional bulk forming finite element analysis Cheon, JS; Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.152, no.1, pp.106 - 115, 2004-01 |
Discover
Open Access
Date issued
- 4,050 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989