| 20 | Numerical analysis of the process-induced residual stress in fiber-reinforced composite materials = 복합재 제조 공정 시 발생되는 잔류 응력 해석link Cisse Cheikh; Cisse Cheikh; Lee, In; et al, 한국과학기술원, 2013 |
| 21 | Numerical and experimental investigation of a complete contact problem by comparing with an asymptotic analysis Jang, Jae-Won; Kim, Hyung-Kyu; Lee, Soon-Bok, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.82, pp.39 - 46, 2016-03 |
| 22 | Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector Lee, Eun Ho; Yang, Dong-Yol; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.78, pp.240 - 250, 2014-11 |
| 23 | Numerical prediction of austenite grain size in a bar rolling process using an evolution model based on a hot compression test Jung, Kyung-Hwan; Lee, Ho-Won; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.519, no.1-2, pp.94 - 104, 2009-08 |
| 24 | Numerical study on the evolution of surface defects in wire drawing Baek, Hyun-Moo; Jin, Young-Gwan; Hwang, Sun-Kwang; Im, Yong-Taek; Son, Il-Heon; Lee, Duk-Lak, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.212, no.4, pp.776 - 785, 2012-04 |
| 25 | Optimum design of aramid-phenolic/glass-phenolic composite journal bearings Yu, Ha-Na; Kim, Seong Su; Lee, Dai-Gil, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.40, no.8, pp.1186 - 1191, 2009-08 |
| 26 | Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion , Proceedings of International Conference on Advanced Forming and Die Manufacturing Technology, Busan, September 2006, 2007-06-12 |
| 27 | The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, CM; Lee, Ho Won, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.7, pp.1398 - 1407, 2014-07 |
| 28 | The strain-smoothed 4-node quadrilateral finite element Lee, Chaemin; Kim, San; Lee, Phill-Seung, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.373, pp.113481, 2021-01 |
| 29 | Thermo-mechanical reliability evaluation of thin electronic packages with high density interconnects = 고집적 연결부를 가진 얇은 전자 패키지의 열적 기계적 신뢰성 평가link Jang, Jae-Won; 장재원; et al, 한국과학기술원, 2014 |
| 30 | Towards improving the 2D-MITC4 element for analysis of plane stress and strain problems Choi, Hyung-Gyu; Lee, Phill-Seung, COMPUTERS & STRUCTURES, v.275, 2023-01 |
| 31 | 고체 입자를 이용한 열교환기에서의 유동 및 열전달의 유한 요소 해석 = Finite element analysis of flow and heat transfer in solid particle moving beds of heat exchangerlink 이완술; Lee, Wan-Sul; et al, 한국과학기술원, 1997 |
| 32 | 유한요소해석과 다구치방법을 이용한 에너지 저장형 의족의 설계에 대한 연구 = A study on the design of energy storing prosthetic foot for the below-knee amputee using the finite element analysis and the Taguchi methodlink 이동희; Lee, Dong-Hee; et al, 한국과학기술원, 1999 |
| 33 | 응집 영역 모델을 이용한 접착 조인트의 유한요소해석과 마이크로 패턴 설계를 통한 접착 강도 향상 = Finite element analysis of the adhesive joint using the cohesive zone model and adhesive strength improvement by the micro-pattern designlink 이민정; Lee, Min-Jung; et al, 한국과학기술원, 2013 |
| 34 | 차량 구조용 접착제를 이용한 접합부의 복합하중조건에서 동적 파단 특성 연구 = Study on the dynamic failure model for structural adhesive joints under combined loading conditionslink 임승찬; Lim, Seung-Chan; et al, 한국과학기술원, 2012 |
